NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
TƯƠNG LAI XANH
KỸ THUẬT NGƯỢC
SCHOOL PROJECTS
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
Building Leonardo da Vinci's Armored Car — The Ancestor of the Tank
In 1487, looking for a patron, Leonardo da Vinci designed an armored fighting vehicle: a round, turtle-shaped wooden shell plated with metal, ringed with light cannons to fire in every direction, and driven by men inside turning cranks. It is the ancestor of the tank, sketched four centuries early. It also hides a famous puzzle: in Leonardo's own drawing the gears drive the front and rear wheels in opposite directions, so it cannot move — a mistake many believe he made on purpose, to stop the design being stolen. This blueprint reconstructs the vehicle and, with the gearing corrected, makes it roll.
Nâng cao
30
Hướng dẫn
1
1
Understand the machine
Understand the machine
Leonardo's armored car is a circular, dome-shaped shell on wheels, plated for protection, with light cannons all around its rim and a crew inside to drive and fire it. Firing in every direction and shielded on all sides, it is a direct ancestor of the tank — proposed in 1487.
2
2
Build the wheeled base
Build the wheeled base
Build a strong circular wooden platform carried on four wheels, with axles bored to turn freely. This base takes the whole weight of the shell, crew and guns, so make it stout.
Vật liệu cho bước này:
Beech Lumber4 cáiCông cụ cần thiết:
Hand Saw
Hand Auger3
3
Raise the conical shell
Raise the conical shell
Build a sloping conical shell of timber over the platform, like an upturned bowl. The angled sides deflect arrows and shot. Leave a small lookout turret on top and gun ports spaced around the lower rim.
Vật liệu cho bước này:
Beech Lumber5 cáiCông cụ cần thiết:
Hand Saw
Knife4
4
Armor the shell
Armor the shell
Reinforce the wooden shell with metal plating so it can shrug off missiles, as Leonardo specified. The plates follow the slope so blows glance off rather than strike square.
Vật liệu cho bước này:
Binding Rope10 métCông cụ cần thiết:
Awl5
5
Arrange the guns around the rim
Arrange the guns around the rim
Set light cannons at the gun ports all around the circular rim so the vehicle can bring fire to bear in any direction at once — the all-round firepower that made the design so menacing on paper.
6
6
Build the crank-and-gear drive
Build the crank-and-gear drive
Inside, seat several crew at cranks that mesh through wooden gears to the wheels, so their combined muscle turns the wheels and moves the vehicle. All the power comes from the men within.
Vật liệu cho bước này:
Wooden Gear6 cái
Dowel Rod2 cáiCông cụ cần thiết:
GougeHand Auger7
7
The famous flaw — and the fix
The famous flaw — and the fix
In Leonardo's own drawing the gears are set so the front and rear wheels would turn OPPOSITE ways, locking the vehicle in place. Scholars debate whether this was a copyist's error or, as many think, a deliberate mistake by Leonardo so the design could not simply be stolen and built. Re-mesh the gears so all wheels drive the same way and it moves.
Công cụ cần thiết:
Gouge8
8
Why it mattered
Why it mattered
Cranked by hand it was too heavy and slow to be practical in 1487, and Leonardo — who called war 'a most beastly madness' — never built it. But the idea of an armored, all-round-firing mobile gun platform is exactly the tank that appeared in 1916, and the corrected reconstruction rolls under its crew's power.
Vật liệu
4- 9 cáiTạm thời
- 10 métTạm thời
- 6 cáiTạm thời
Vật liệu bản thiết kế liên kết
You can swap these in
Can't get one of the materials? Swap it for an equivalent — these work just as well.
- Instead of Beech Lumber, try:
Yellow Birch Lumber
Western Hemlock Lumber - Instead of Knife, try:
Blunt Collection Knife
Gilder's Knife
Sharp Cinnamon Knife - Instead of Hand Saw, try:
Portable Band Saw
Band Saw (9-inch, Benchtop)
Miter Box with Saw
Small Hand Saw - Instead of Dowel Rod, try:
Pine Dowel Rod Set (12 Diameters) - Instead of Binding Rope, try:
Lowering Rope
Heavy-Duty Rope
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
Related blueprints
Other builds that share materials, tools, or techniques with this one.
Building Leonardo da Vinci's Aerial Screw — The Ancestor of the Helicopter
Building Leonardo da Vinci's Self-Propelled Cart — The First Programmable Robot
Building Leonardo da Vinci's Ornithopter — The Flapping-Wing Flying Machine
Building Leonardo da Vinci's Parachute — The Sealed Linen Pyramid of 1485
Building Leonardo da Vinci's Revolving Bridge — The Swing Bridge for a Marching Army
Building a Roman Concrete Dome — The Unreinforced Vault That Crowned the Pantheonconstruction
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.