NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO
The Nutmeg Grater: A Curved Plate and a Holder That Rocks
TheChef

Tạo bởi

TheChef

27. tháng Chín 2026DK
2
0
0
0
0

The Nutmeg Grater: A Curved Plate and a Holder That Rocks

A whole nutmeg is hard, small and slippery, and a flat grater quickly grates fingertips too. A mechanical grater holds the nut and guides it over the teeth. George H. Thomas of Chicopee Falls, Massachusetts, received US 458,041, dated 18 August 1891 (filed 5 May 1891), for a grater — the one sold as "The Edgar" — with "an elongated curved grater-plate" and a frame carrying the nutmeg "adapted to move lengthwise of the grater-plate to rock or oscillate upon an axis coincident with the axis of the said plate or to take an intermediate direction." A spring presses the nut to the teeth. Rocking and sliding in turn knock off the ridges of powder that straight strokes pack onto the plate. This rung models that clogging, then grates a nutmeg both ways.
Cơ bản
About 1 hour

Hướng dẫn

1

Clogging and rocking

Đang tải sổ tay Jupyter…
2

Rows of tiny chisels

A grater is a file with raised teeth. The embedded blueprint explains how teeth cut.
3

Read US 458,041

"My invention relates to nutmeg-graters; and it consists in the combination, with an elongated curved grater-plate, of a shell or frame carrying the nutmeg and adapted to move lengthwise of the grater-plate to rock or oscillate upon an axis coincident with the axis of the said plate or to take an intermediate direction." "In the practical use of graters as generally constructed it is found that some of the detached portions of the nut or other article being grated adhere to the grating surface or plate, and, accumulating from time to time, form ridges, which soon render a large part of the grating-surface unserviceable. This objection is overcome by my construction, for it is clear that the accumulations forming themselves in ridges during the longitudinal movement of the nut-holder will readily be removed during the rocking or oscillating of the holder, and vice versa." "A represents the grating-plate, which is made semicircular in cross-section and elongated in the direction of its axis. This plate will be made of sheet metal punched or indented from the rear face and bent to form".
4

When teeth stop cutting

Filings that stick in a file's teeth stop it cutting, just as Thomas's ridges do. The embedded blueprint explains clogging.
5

Grate a nutmeg both ways

Weigh two whole nutmegs. Grate the first for 60 strokes straight along the plate only, keeping it from turning; collect and weigh the gratings in each block of 20 strokes, and look at the plate for lines of packed powder. Grate the second for 60 strokes, rocking and pushing as Thomas's holder allows, and weigh again. Compare grams per stroke in each block, and how much powder is left packed on the teeth. Brush the plate clean between the two. Keep fingertips behind the holder, never on the teeth.

Vật liệu cho bước này:

Hạt nhục đậu khấu nguyênHạt nhục đậu khấu nguyên2 cái

Công cụ cần thiết:

Dụng cụ bào nhục đậu khấuDụng cụ bào nhục đậu khấu
Cân điện tửCân điện tử
6

A grater that clogs or slips

Nutmeg grater troubleshooting.

Flow

Loading...
7

History and honest limits

**George H. Thomas** of Chicopee Falls, Massachusetts, filed US 458,041 on 5 May 1891; it is dated 18 August 1891. His claims cover a curved grating plate with a holder movable "longitudinally, transversely, and angularly". **Honest limits.** The patent gives no tooth sizes. The powder added per stroke, the fraction a crossing stroke knocks off and the stroke counts in the model are examples.

Vật liệu

1

Công cụ yêu cầu

2

CC0 Phạm vi công cộng

Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.

Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.

Thảo luận

(0)

Đăng nhập để tham gia thảo luận

Đang tải bình luận...