NGHỆ THUẬT
LÀM ĐẸP VÀ SỨC KHỎE
THỦ CÔNG
VĂN HÓA VÀ LỊCH SỬ
GIẢI TRÍ
MÔI TRƯỜNG
THỰC PHẨM VÀ ĐỒ UỐNG
KỸ THUẬT NGƯỢC
KHOA HỌC
THỂ THAO
CÔNG NGHỆ
THIẾT BỊ ĐEO

The Pressure-Fed Fountain Paint Brush: Air Pushes the Paint, a Finger Stops It
Painting from a pot means stopping every few strokes to reload the brush.
Gottfried Meyer and Charles G. Braun of Philadelphia received US 821,879, patented 29 May 1906, for a fountain paint brush: a reservoir pressurised through an air pipe with a check valve sends paint along a hose to a tube in a recess of the brush head and out through a flattened flexible web among the bristles; a spring holds a plunger open, and the forefinger pushes its knob to cut the paint off.
This rung works out how paint thickness and pressure set the flow, then builds the tank from a bottle and a tyre valve, feeds a brush, and measures the flow.
Trung cấp
About 3 hours
Hướng dẫn
1
1
Flow through the hose
Flow through the hose
Đang tải sổ tay Jupyter…
2
2
A one-way valve before it
A one-way valve before it
The embedded blueprint lets flow pass one way only. Meyer and Braun put one on the air pipe so the pumped air stays in the paint tank.
3
3
Read US 821,879
Read US 821,879
"The knob 35 is disposed in convenient position for the fore or index finger of the hand which holds the brush, and the valve or plunger 33 can thus be easily maintained in its closed or inward position and the supply of paint cut off when not required."
"The air-pressure causes the paint to flow to the brush no matter in what position the latter may be held and the flow is under complete control of the operator, as above noted."
4
4
Fit the cap
Fit the cap
Drill a 1.5 L PET bottle's cap for a tyre valve and for vinyl tubing. Seat the valve, and push the tubing through until it touches the bottom. Seal both with epoxy.
Vật liệu cho bước này:
Chai PET (nước có ga)1 cái
Van lốp1 cái
Ống nhựa vinyl trong1 cái
Keo epoxy hai thành phần1 cáiCông cụ cần thiết:
Máy khoan pin
Bộ mũi khoan
Dao rọc thủ công5
5
Feed the brush
Feed the brush
Drill a 6 mm hole down through the stock of a 70 mm brush from the set, beside the handle. Push silicone tubing through it into the bristles and flatten its last 30 mm with a cable tie.
Vật liệu cho bước này:
Bộ cọ vẽ1 cái
Dây rút nhựa1 cáiCông cụ cần thiết:
Ê tô bàn nguội
Máy khoan pin
Bộ mũi khoan6
6
Make the finger valve
Make the finger valve
Screw a hardwood block to the handle over the tubing. Fit an M5 screw through it with a spring under the head, so the screw rests off the tube and a press of the forefinger pinches it shut.
Vật liệu cho bước này:
Chốt gỗ cứng1 cái
Vít máy1 cái
Bộ lò xo nén1 cáiCông cụ cần thiết:
Cưa sắt
Máy khoan pin
Bộ mũi khoan
Bộ tua vít7
7
Join and pressurise
Join and pressurise
Join the bottle's tubing to the brush's with a 1.5 m length. Half fill the bottle with acrylic paint thinned with water, cap it, and pump to 0.2 bar on the gauge.
Vật liệu cho bước này:
Bộ màu acrylic1 cái
Nước1 cáiCông cụ cần thiết:
Bơm xe đạp
Đồng hồ áp suất8
8
The patent drawing
The patent drawing
US 821,879 drawing sheet, public domain (expired patent).

9
9
Measure the flow
Measure the flow
Hold the brush over the measuring cylinder for 30 s and read the paint. Repeat at 0.4 bar, with the brush upside down, and with the button pressed.

Công cụ cần thiết:
Ống đong
Đồng hồ bấm giờ
Đồng hồ áp suất10
10
A brush that floods, starves or will not stop
A brush that floods, starves or will not stop
Pressure-fed fountain paint brush troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Gottfried Meyer** and **Charles G. Braun** of Philadelphia filed US 821,879 on 22 November 1905; it was patented 29 May 1906. Their reservoir has a valve casing with a detachable plug valve; a pipe reaches the bottom with lateral apertures; a sheet-metal band closes the recess in the brush head; all parts detach for cleaning when the colour is changed.
**Honest limits.** A pinch on silicone tubing stands in for their plunger in a tube, and a PET bottle at low pressure for their reservoir. The notebook treats paint as a simple liquid. Your flows are the result.
Vật liệu
12- Tạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- Tạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
- 1 cáiTạm thời
Công cụ yêu cầu
10- 1 vendor sell this, none ship to you yetTạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
- Tạm thời
Blueprint liên quan
Các blueprint này chia sẻ kiến thức — kỹ thuật, vật liệu hoặc nguyên tắc
CC0 Phạm vi công cộng
Bản thiết kế này được phát hành theo CC0. Bạn tự do sao chép, sửa đổi, phân phối và sử dụng cho bất kỳ mục đích nào mà không cần xin phép.
Hỗ trợ nhà sáng tạo bằng cách mua sản phẩm qua bản thiết kế, nơi họ nhận Hoa hồng nhà sáng tạo do nhà bán hàng đặt, hoặc tạo phiên bản mới và kết nối trong bản thiết kế riêng để chia sẻ doanh thu.


