UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO

Carbon Resistance Ring: Laminated Paper Gelled with 15% Tung Oil, Graphite-Shellac Track
Mallory's quiet volume-control ring (US 2,144,925, 1939). Hard bases were noisy and soft paper ones changed with damp. Their answer: paper rings soaked in 15 % raw tung oil and baked, so the oil gels inside the paper. It shuts out moisture but stays soft and springy, and the wiper runs on it quietly. A graphite paint makes the track, silver paint the ends.
The picture: the patent's drawing (Fig. 3).
Ophakathi
1 day
Imiyalelo
1
1
Punch rings from three-ply paper
Punch rings from three-ply paper
The base is three papers stuck into one sheet: litho paper at the back, newsprint in the middle, manila on the face that takes the track. Punch rings from it. Ours: a punch press with a ring die.
Izinto zokwakha zalesi sinyathelo:
Iphepha elinezingqimba ezintathu elihlanganisiwe1 ucezuAmathuluzi adingekayo:
Umshini wokubhoboza
Isikhunta sokusika izindandatho
Amagilavu erabha2
2
Soak 1 hour in 15 % tung oil in naphtha
Soak 1 hour in 15 % tung oil in naphtha
Soak the rings for about one hour in about 15 % raw tung oil in naphtha. Use raw oil, not heat-bodied or treated oil, so it can still gel.
Izinto zokwakha zalesi sinyathelo:
Uwoyela we-tung15 partsAmathuluzi adingekayo:
I-naphtha
Ibhikha Lengilazi
Isikali sesilinganiso
Isigovuzi
Imaski yokuphefumula yobuso bonke
Amagilavu erabha3
3
Air-dry, then bake at 210–250 °C
Air-dry, then bake at 210–250 °C
Dry the rings in air for two hours or more, then bake 15 to 30 minutes at 210 to 250 °C. The oil gels in the paper's pores; the paper stays pliable.
Amathuluzi adingekayo:
Ihhavini yokomisa
Ithemomitha Yehhavini
Amagilavu Amelana Nokushisa4
4
Spray the graphite track
Spray the graphite track
Spray on the resistance paint, for example graphite in a shellac binder. The patent gives no proportions. The track can be tapered in thickness, width or mix to shape the resistance curve.
Izinto zokwakha zalesi sinyathelo:
Impushana Ye-graphite1 as required
I-shellac1 as requiredAmathuluzi adingekayo:
Isibhamu Sokuchela
I-compressor yomoya
Imaski yokuphefumula yobuso bonke
Amagilavu erabha5
5
Paint silver ends, bake at 220 °C
Paint silver ends, bake at 220 °C
Spray or paint the two end terminals with silver particles in shellac. Dry, then bake at about 220 °C to cure and harden the track. The slight warp from soaking flattens out again.
Izinto zokwakha zalesi sinyathelo:
Upende wesiliva odlulisa ugesi1 as requiredAmathuluzi adingekayo:
Isibhamu Sokuchela
Ihhavini yokomisa
Ithemomitha Yehhavini
Amagilavu Amelana NokushisaIzinto
5- Isibambeli
- 15 partsIsibambeli
- 1 as requiredIsibambeli
- 1 as requiredIsibambeli
- 1 as requiredIsibambeli
Amathuluzi Adingekayo
13- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- 1 vendor sell this, none ship to you yetIsibambeli
Le blueprint yenza
Ama-blueprint ahlobene
Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.


