Ukusebenzisana
UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Comb-Cylinder Egg Beater: Bars Turn Between Fixed Arms
English
Emma

Yenziwe ngu-

Emma

6. uMfumfu 2026SE
31
0
0
0
0

Comb-Cylinder Egg Beater: Bars Turn Between Fixed Arms

Every beater so far turned through a liquid that nothing held still. Peter Schildecker of Pittsburgh received US 40,188, dated 6 October 1863, for an egg beater: a horizontal cylinder on a light frame, with a still shaft along its axis carrying arms set in pairs at right angles, and a frame of parallel bars that turns round the shaft so that "each bar p will come between a pair of arms"; a funnel on a slide fills it, and a cap held by slots over pins opens it to pour out through a spout. This rung works out the passes per second, then prints the bar frame and arm comb, builds the cylinder and gearing, and times a beating.
Osezingeni eliphezulu
About 6 hours, plus printing

Imiyalelo

1

Passes per second

Ilayisha incwadi ye-Jupyter…
2

Breaking the swirl before it

The embedded blueprint breaks a propeller's swirl with rocking arms. Schildecker holds his arms still and turns the bars past them.
3

Read US 40,188

"The beater consists of a frame composed of a number of parallel bars, p, placed at uniform distances apart, so that each bar p will come between a pair of arms, n n', when in place in the cylinder a." "My improved egg-beater is designed to beat up the white of eggs or eggs mixed with sugar, and by the use of it I am enabled to accomplish the result more effectually and in a much shorter space of time than by hand or by the use of any contrivances for a similar purpose with which I am acquainted."
4

Print the bars and arms

Print the bar frame and the arm comb on its shaft. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.

Izinto zokwakha zalesi sinyathelo:

Ifilamenti ye-PETGIfilamenti ye-PETG1 ucezu

Amathuluzi adingekayo:

Iphrinta ye-3D yentambo (i-FDM)Iphrinta ye-3D yentambo (i-FDM)
5

Print the bar frame

The bar frame, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
6

Print the arm comb on its shaft

The arm comb on its shaft, printed as step 4 describes.
Ifayela LomklamoSTLCC0 - Free
7

Make the cylinder

Cut 160 mm of 100 mm PVC pipe. Close one end with a plywood disk and silicone; make a plywood cap for the other end that twists onto two screws. Saw a 30 mm filling hole on top and fit a funnel over it.

Izinto zokwakha zalesi sinyathelo:

Ipayipi Le-PVCIpayipi Le-PVC1 ucezu
Ishidi le-plywoodIshidi le-plywood1 ucezu
Isivalo Se-siliconeIsivalo Se-silicone1 ucezu
Isikulufo sokhuni #8 x 1"Isikulufo sokhuni #8 x 1"1 ucezu

Amathuluzi adingekayo:

Isaha SensimbiIsaha Sensimbi
Isaha Se-CopingIsaha Se-Coping
Isethi yamasaha ezimboboIsethi yamasaha ezimbobo
Ibhola ElingenantamboIbhola Elingenantambo
8

Shaft, frame and gearing

Fix the arm comb's shaft through the cap so it cannot turn. Slide the bar frame onto it so its bars fall between the arms, and couple its end ring to a 5 mm crank shaft through the closed end, with a 12-tooth pinion and a 36-tooth wheel and crank on a plywood stand.

Izinto zokwakha zalesi sinyathelo:

Ubhamu Oluyindilinga Lwensimbi EthambileUbhamu Oluyindilinga Lwensimbi Ethambile1 ucezu
I-epoxy Yezingxenye EzimbiliI-epoxy Yezingxenye Ezimbili1 ucezu
Ibhulokhi Lokhuni OluqinileIbhulokhi Lokhuni Oluqinile1 ucezu
Izikulufu zomshiniIzikulufu zomshini1 ucezu
Inathi Yezinhlangothi EziyisithuphaInathi Yezinhlangothi Eziyisithupha1 ucezu
Iwasha EliyisicabaIwasha Eliyisicaba1 ucezu

Amathuluzi adingekayo:

Ibhola ElingenantamboIbhola Elingenantambo
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Isipanela esilungisekayoIsipanela esilungisekayo
Isethi yezikulufudrayivaIsethi yezikulufudrayiva
9

The patent drawing

US 40,188 drawing sheet, public domain (expired patent).
Isinyathelo 9 - Image 1
10

Beat egg whites with sugar

Fill through the funnel with two egg whites and a spoon of sugar. Crank about once a second; time to stiff peaks, then twist the cap off and pour.
Isinyathelo 10 - Image 1

Izinto zokwakha zalesi sinyathelo:

IqandaIqanda2 izicucu
Ushukela ogayekileUshukela ogayekile1 ucezu

Amathuluzi adingekayo:

Isitsha esikhulu sokuxuba sensimbi engagqwaliIsitsha esikhulu sokuxuba sensimbi engagqwali
Iwashi Lokumisa IsikhathiIwashi Lokumisa Isikhathi
11

Bars that hit the arms, a shaft that turns

Comb-cylinder egg beater troubleshooting.

Flow

Loading...
12

History and honest limits

**Peter Schildecker** of Pittsburgh received US 40,188, dated 6 October 1863. His cylinder is tin on a light framework; the cap's rim has two L-shaped slots over pins on the cylinder; a pin through the cap holds the arm shaft still; the bar frame's end bar has a square box flange that takes the crank shaft's square end; a pinion on the crank shaft is driven by a larger cog wheel with a crank; the funnel slide opens or closes the filling hole. **Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. PVC pipe and plywood stand in for tin, and printed parts for his bars and arms. Your times are the result.

Izinto

13

Amathuluzi Adingekayo

10

Amafayela omklamo

2

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...