UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
Leather Strips and Straps
Belts, handles, laces and hinges start as strips cut from a side of firm vegetable-tanned leather. A strap cutter holds the width while you draw it along a straight edge; the edges are then bevelled, sanded and burnished smooth with a little gum and friction so they do not fray or fuzz.
Firm leather about 3–4 mm thick suits straps; thinner leather suits laces and binding strips.
Oqalayo
1 hour
Imiyalelo
1
1
The leather
The leather
How the firm, vegetable-tanned leather is made.
2
2
Cut a straight edge
Cut a straight edge
Lay the leather grain side up on the cutting mat and cut one long straight edge along the straightedge, following the backbone line where the leather is most even.
Izinto zokwakha zalesi sinyathelo:
Isikhumba esishukwe ngezitshalo0.1 sqmAmathuluzi adingekayo:
Umphetho oqondile
Ummese wemisebenzi
Umata wokusika ozilungisayo
I-Caliper Yedijithali Yamayintshi Ayi-63
3
Pull the strips
Pull the strips
Set the strap cutter to the width, run its fence against the straight edge and pull it along the leather in one steady draw. Repeat for each strip.
Amathuluzi adingekayo:
Isisiki Somchilo
Ithephu Lokulinganisa4
4
Bevel the edges
Bevel the edges
Run the edge beveler along both corners of each edge, front and back.
Amathuluzi adingekayo:
Ithuluzi lokugobisa umphetho wesikhumba5
5
Sand and burnish
Sand and burnish
Sand the edges smooth, dampen them with a little gum tragacanth in water, and rub hard with the wooden slicker until they shine. A touch of beeswax finishes them.
Izinto zokwakha zalesi sinyathelo:
I-gum tragacanth (i-kitre)5 g
Amanzi0.05 ilitha
Isibabule Sezinyosi5 gAmathuluzi adingekayo:
Ishidi lephepha lokuhlikihla
Ithuluzi lokupholisha umphetho wesikhumba6
6
Punch and finish
Punch and finish
Cut the ends to shape and punch any holes the strap needs.
Amathuluzi adingekayo:
Isethi yezibhoboza zesikhumbaUmmese wemisebenzi7
7
Troubleshooting
Troubleshooting
Strap cutting troubleshooting.
Flow
Loading...
Izinto
4- Isibambeli
- Isibambeli
- 0.05 ilithaIsibambeli
- Isibambeli
Amathuluzi Adingekayo
10- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- Isibambeli
- 1 vendor sell this, none ship to you yetIsibambeli
- Isibambeli
- Isibambeli
- Isibambeli
Le blueprint yenza
Ama-blueprint ahlobene
Lama-blueprint abelana ngolwazi — amasu, izinto noma izimiso
CC0 Isizinda Somphakathi
Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.
Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.