UBUCIKO
UBUHLE NEMPILO
UBUCIKO BEZANDLA
AMASIKO NOMLANDO
EZOKUZIJABULISA
IMVELO
UKUDLA NEZIPHUZO
REVERSE ENGINEERING
IZAYENSI
EZEMIDLALO
UBUCHWEPHESHE
IZINTO EZIGQOKWAYO
The Spring Table Tongs: Notched Jaws to Hold a Bone and Pick Out Fish-Bones
TheChef

Yenziwe ngu-

TheChef

30. uMandulo 2026DK
0
0
0
0
0

The Spring Table Tongs: Notched Jaws to Hold a Bone and Pick Out Fish-Bones

Eating chicken or fish at table means holding a greasy bone in the fingers or picking fish-bones out with them. James Huffman of Mount Crawford and Joseph Funkhouser of Keezletown, Virginia, received US 197,372, dated 20 November 1877, for "an implement to be used as table-tongs", "formed of a single piece of spring-steel or other suitable metal, and somewhat in the shape of a pair of sugar-tongs, for table purposes". Its jaws have V-shaped notches that meet to hold a bone firmly while the meat is picked off, and flat faces from the notches to the tips that fit snugly together to catch and remove fish-bones. This rung works out how hard the spring body pushes back, then bends the tongs from spring steel with notched jaws and thumb pieces, and tries them at the table.
Ophakathi
About 3 hours

Imiyalelo

1

The spring's push

Ilayisha incwadi ye-Jupyter…
2

Tongs for the table before it

The embedded blueprint combines a spoon or shovel with tongs. Huffman and Funkhouser make the whole tongs of one spring and shape the jaws for bones.
3

Read US 197,372

"A represents the body of the implement, and B B two pieces formed on said body for thumb and finger pieces. The two ends or jaws of the implement are provided with V-shaped notches C, which are opposite each other. The metal is perfectly flat from C to x on the jaws, so that they (the jaws) may fit snugly together." "The object of this implement is to hold chicken or other bones while eating, as well as to pick out fish-bones. The bone, while eating, is held firmly in the notches C C. When not used for holding bones while the flesh is being picked off, the flat part from C to x serves to catch and remove fish-bones."
4

Make the tongs and try them

**Body.** Cut 26 cm of spring steel strip about 10 mm wide. File its ends round and all its edges smooth. Bend it in the middle round a 30 mm bar into a bow, and shape the two arms like sugar tongs so the tips meet when pressed and spring 3–4 cm apart when released. **Jaws.** Bend the last 2 cm of each arm inward to meet the other. File a V notch in the middle of each jaw's edge so the two notches face each other, and file the jaws flat from the notch to the tip so they close snugly. **Grips.** Rivet a small oval of flat bar to each arm near its middle as the thumb and finger pieces B B. **Test.** Hold a cooked chicken bone in the notches and pick the meat off with a fork. Pick small bones from a piece of cooked fish with the flat tips.

Izinto zokwakha zalesi sinyathelo:

Umucu wensimbi yensiphoUmucu wensimbi yensipho0.3 imitha
Ibha Eyisicaba Yensimbi EthambileIbha Eyisicaba Yensimbi Ethambile0.1 imitha
Ama-pop rivetAma-pop rivet2 izicucu

Amathuluzi adingekayo:

Isaha SensimbiIsaha Sensimbi
Isibambo SebhentshiIsibambo Sebhentshi
IsandoIsando
Izinsimbi zokuhlikihla (ezesandla)Izinsimbi zokuhlikihla (ezesandla)
Isethi Yamafayela AmancaneIsethi Yamafayela Amancane
Ibhola ElingenantamboIbhola Elingenantambo
Iqoqo Lamakhanda EbholaIqoqo Lamakhanda Ebhola
Ikhithi yesibhamu se-pop rivetIkhithi yesibhamu se-pop rivet
Isilinganiso Samandla (Isikali Sensimbi Esontekile)Isilinganiso Samandla (Isikali Sensimbi Esontekile)
Amagilavu Omsebenzi EsikhumbaAmagilavu Omsebenzi Esikhumba
5

Tongs that slip, pinch or will not spring open

Spring table tongs troubleshooting.

Flow

Loading...
6

History and honest limits

**James Huffman** of Mount Crawford and **Joseph Funkhouser** of Keezletown, Rockingham County, Virginia, filed US 197,372 on 27 September 1877; it is dated 20 November 1877. Their claim is the spring body with jaws carrying the notches C C and the flat surfaces from C to x. **Honest limits.** Bought spring steel strip, bent cold, stands in for their made-up body, and riveted pieces for the formed thumb and finger pieces. The notebook uses the straight cantilever formula for a curved arm; its dimensions and closing are examples. Your use at table is the result.

Izinto

3

Amathuluzi Adingekayo

10

CC0 Isizinda Somphakathi

Le blueprint ikhishwe ngaphansi kwe-CC0. Ukhululekile ukukopisha, ukuguqula, ukusabalalisa, nokusebenzisa ngaphandle kwemvume.

Sekela uMenzi ngokuthenga imikhiqizo nge-Blueprint yabo IKhomishane Yomenzi kumiswe ngabathengisi, noma dala inguqulo entsha yale Blueprint bese uyifaka njengoxhumaniso ku-Blueprint yakho ukuze wabelane ngemali engenayo.

Ingxoxo

(0)

Ngena ukuze ujoyine ingxoxo

Kulayishwa amazwana...