Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)
Charlie

Criado por

Charlie

1. novembro 2026DE
12
0
0
0
0

Argon: Air Led over Calcium Carbide and Calcium Chloride at 800 °C (Fischer and Ringe, Thorpe 1912)

Air is nearly 1 % argon. Red-hot calcium carbide with a little calcium chloride swallows both the oxygen and the nitrogen; argon, which combines with nothing, passes straight through. Result: about 11 litres of argon from 7 kg of carbide in two days. It still holds traces of neon, krypton and xenon (0.25 %, mostly neon). Source: Thorpe, Dictionary of Applied Chemistry vol. 1 (1912), p. 291, after Fischer and Ringe (Ber. 41, 2017). Not given: the vessel, the air volume, and how the water and carbon dioxide are taken out. Picture drawn by Youblob.
Avançado
2 days

Instruções

1

Mix the absorbent

Mix calcium carbide (90 %) with calcium chloride (10 %): 7 kg carbide takes about 0.78 kg chloride (our arithmetic). Fill a tube with it. Ours: a porcelain tube in a tube furnace.

Ferramentas necessárias:

Carboneto de cálcioCarboneto de cálcio
Cloreto de cálcioCloreto de cálcio
Tubo de PorcelanaTubo de Porcelana
Forno tubularForno tubular
2

Drive off volatile matter

Heat the mixture under reduced pressure first, to drive off anything volatile.

Ferramentas necessárias:

Bomba de vácuoBomba de vácuo
Forno tubularForno tubular
3

Lead air over it at 800 °C

Hold the mixture at 800 °C and lead air over it slowly. The oxygen and nitrogen are taken up; what comes out is mostly argon. Ours: draw the air through with an aspirator.

Materiais para este passo:

Ar atmosférico - TerraAr atmosférico - Terra1 as required

Ferramentas necessárias:

PirómetroPirómetro
AspiradorAspirador
Forno tubularForno tubular
4

Burn the traces over hot copper oxide

Lead the gas over hot copper oxide. It burns any hydrogen, hydrocarbons and carbon monoxide.

Ferramentas necessárias:

Óxido de cobreÓxido de cobre
Tubo de PorcelanaTubo de Porcelana
Forno tubularForno tubular
5

Take out water and carbon dioxide

Remove the water vapour and carbon dioxide. Ours: soda lime for the carbon dioxide, then phosphorus pentoxide for the water.

Ferramentas necessárias:

Cal sodada (absorvente de CO2)Cal sodada (absorvente de CO2)
Pentóxido de fósforoPentóxido de fósforo
Frasco lavador de gasesFrasco lavador de gases
6

Collect the argon

Collect the gas. Expect about 11 litres in two days from 7 kg of carbide. Ours: over water in gas jars.

Ferramentas necessárias:

Cuba pneumática com provetas de gásCuba pneumática com provetas de gás

Materiais

1

Ferramentas necessárias

12

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...