Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Aspirator: a Vessel of Water with a Tap at the Bottom (Sutton, 1904)
The simplest aspirator: a closed vessel of known volume, full of water, with a tap at the bottom. As the water runs out it draws gas in through the apparatus attached to it, and the volume of water run out is the volume of gas drawn through.
Result: an aspirator that draws a measured volume of gas, for example 1/10 cubic foot, through an absorber at a steady rate.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), pp. 581-582. Unknown: the vessel's material and the tap. Picture: p. 581 of the book.
Iniciante
Unknown
Instruções
1
1
Fit the vessel
Fit the vessel
Take a vessel of known volume, for example exactly 1/10 cubic foot, and fix a tap at its bottom. Close its mouth tightly with a cork carrying a glass tube, which connects to the absorber the gas is to pass through. Ours: a large clear glass bottle. Not given: the vessel's material, the tap.
Materiais para este passo:
Garrafa de vidro (transparente)1 aspirator vessel
Válvula desconhecida1 bottom tap
Rolhas1 stopper
Tubo de vidro1 inlet tubeFerramentas necessárias:
Maçarico de vidreiro de bancada
Dimensões desconhecidas2
2
Set the flow and draw the gas
Set the flow and draw the gas
Fill the vessel with water, connect the absorber, check that everything is tight, and open the tap partly: the small outflow of water draws the gas through the absorber. For an even rate, fit about a yard of tubing to the outlet, for a steady head, ending in a fine jet tried beforehand to give the time wanted; used reversed, the jet clogs less. When the vessel is empty the gas stops, and the water run out measures the gas passed. Collect and measure the water if the vessel is not of fixed volume.
Materiais para este passo:
Tubo de borracha1 outlet tubing
Tubo de vidro1 jetFerramentas necessárias:
Proveta graduadaMateriais
5- 1 aspirator vesselReferência
- 1 bottom tapReferência
- 1 stopperReferência
- 1 jetReferência
- 1 outlet tubingReferência
Ferramentas necessárias
3- Referência
- Referência
- Referência
Materiais de Blueprints conectados

10% de atribuição
Blowing a Glass Bottle by Hand — Free-Blown Vessel Shaping
por Forge
Trabalho em Vidro
69
0
0
0
5
0

10% de atribuição
Natural Cork Stoppers from Bark
por Woody
Marcenaria
46
0
0
0
3
0

10% de atribuição
Glass Tube: Drawn by Two Glassmakers Walking Apart (Pellatt, 1849)
por Charlie
Inorgânico
8
0
0
0
2
0

10% de atribuição
Natural Rubber Tubing, Bands and Sheet: Sulfur-Cured with Heat
por Mary
Química
16
0
0
0
2
0
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
