Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Boring Bar: Driven Between Centres, with a Set-Screw Cutter (Yates, 1922)
Forge

Criado por

Forge

4. novembro 2026NO
13
0
0
0
0

Boring Bar: Driven Between Centres, with a Set-Screw Cutter (Yates, 1922)

A home-made boring bar for holes too long for an ordinary boring tool, which would spring. A short, stiff bar runs between the lathe centres, driven by a dog, and carries a hardened tool-steel cutter locked in a cross-hole by a set screw. The work is bolted to the lathe carriage and fed past the turning cutter. Result: a boring bar, plus the small short-cut bar of Fig. 110. Source: R. F. Yates, Lathe Work for Beginners (1922), pp. 134-136. Unknown: bar diameter and set-screw size. Picture: Figs. 110-111 of the book.
Intermediário
Unknown

Instruções

1

Turn the bar

Turn a bar no longer than the job needs; the shorter it is, the less it twists under the cut. Drill both ends for the lathe centres. For short cuts, the small bar of Fig. 110 is 4 to 6 inches long with a round shank and a squared end. Ours: mild steel round bar. Not given: the diameter.

Materiais para este passo:

Barra redonda de aço macioBarra redonda de aço macio1 boring bar

Ferramentas necessárias:

Torno mecânicoTorno mecânico
Dimensões desconhecidasDimensões desconhecidas
2

Fit the cutter and set screw

Drill a cross-hole through the bar for the cutter and drill and tap a hole into it for a set screw that locks the cutter. Make the cutter of tool steel, grind its point with proper clearance, and harden it.

Materiais para este passo:

Barra quadrada de aço para ferramentasBarra quadrada de aço para ferramentas1 cutter
Metal desconhecidoMetal desconhecido1 set screw

Ferramentas necessárias:

Engenho de furarEngenho de furar
Jogo de machos e cossinetesJogo de machos e cossinetes
Mó de afiarMó de afiar
Forno de tratamento térmicoForno de tratamento térmico
Balde de têmperaBalde de têmpera
3

Bore with it

Bolt the work down to the lathe carriage carefully and securely; carriage bolts of several sizes are handy for this. Drive the bar between centres with a dog and feed the carriage. Run very slowly when boring cast iron, and keep the feed light so the bar does not spring.

Ferramentas necessárias:

Torno mecânicoTorno mecânico
Parafuso de carroçariaParafuso de carroçaria

Materiais

3

Ferramentas necessárias

8

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...