Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)
H. J. Blacklidge's bobsled from The Boy Mechanic, Book 2 (1915): "any boy who can drive a nail and bore a hole can have a bobsled on short notice." Four barrel staves make the runners of two short bobs under a 4 ft board; the front bob turns on a centre bolt and is steered by a rope.
Iniciante
About 3 hours
Instruções
1
1
His list in centimetres
His list in centimetres
A carregar o notebook Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
The materials: four good, solid barrel staves; four blocks 4 in long, 4 in wide and 2 in thick; two pieces 12 in long, 4 in wide and 1 in thick; one piece 12 in long, 2 in wide and 1-3/4 in thick; and a good board 4 ft long, 12 in wide and 1 in thick.
3
3
Make the two bobs
Make the two bobs
Make each crosspiece-and-knee unit from one 12 x 4 x 1 in piece and two of the blocks, as in his figure, and nail a barrel stave to each side for runners.
Materiais para este passo:
Aduela de barril4 peças
Tábua de pinho1 peça
Tábua de madeira de lei1 peça
Pregos1 peçaFerramentas necessárias:
Serrote
Martelo
Lápis
Fita métrica4
4
Fit the bobs to the board
Fit the bobs to the board
Fasten one bob to one end of the board. Attach the other at the centre of its crosspiece with a bolt, so it can turn. Fasten the 1-3/4 by 2 in piece, 12 in long, across the top of the board at the front end.
Materiais para este passo:
Tábua de pinho1 peça
Tábua de madeira de lei1 peça
Parafuso de carroçaria1 peça
Anilha plana2 peças
Pregos1 peçaFerramentas necessárias:
Arco de pua e broca
Serrote
Martelo5
5
Fit the steering rope
Fit the steering rope
Fasten a rope to the knees of the front runners; it steers the sled.
Materiais para este passo:
Corda de algodão1 peçaFerramentas necessárias:
Arco de pua e broca6
6
Troubleshooting
Troubleshooting
Bobsled troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "An Inexpensive Bobsled" by H. J. Blacklidge, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 49). Which end of the board gets the bolted bob, the bolt size and the stave length come only from his figure or are not given. The tools and metric figures are ours.
Materiais
7- 4 peçasReferência
- 1 peçaReferência
- 1 peçaReferência
- 2 peçasReferência
- 1 peçaReferência
- 2 peçasReferência
- 1 peçaReferência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


