Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Coil Spring: Small Springs Wound Through a Nut (Boy Mechanic, 1915)
Forge

Criado por

Forge

4. novembro 2026NO
17
0
0
0
0

Coil Spring: Small Springs Wound Through a Nut (Boy Mechanic, 1915)

Small, even coil springs wound by hand: spring wire is turned round a rod that runs through a nut held in a vise, and the nut's thread lays every coil at the same pitch. Variable: the nut's thread pitch gives open or closed coils. Source: The Boy Mechanic, Book 2 (1915), p. 197. Picture: the book's sketch.
Iniciante
Unknown

Instruções

1

Prepare the nut and rod

Take a nut whose thread will take the spring wire, and file a small notch, as deep as the thread, where the thread starts. Take a smooth rod that passes snugly through the nut. Shape one end to fit a brace (or a drill chuck) and drill a hole across the other end for the wire.

Ferramentas necessárias:

Porca sextavadaPorca sextavada
Varão de aço macioVarão de aço macio
Lima para metalLima para metal
Berbequim de mãoBerbequim de mão
2

Wind the spring

Bend the end of the wire at right angles and push it into the hole. Grip the nut in a vise, put the rod through it, and turn the rod with the brace, guiding the wire into the notch at the start of the thread. The wire follows the thread and comes out as an even spring. Cut it to length.

Materiais para este passo:

Fio de aço para molasFio de aço para molas1 peça

Ferramentas necessárias:

Torno de bancadaTorno de bancada
Arco de pua e brocaArco de pua e broca
Tesoura de chapaTesoura de chapa

Materiais

1

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...