Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Copper-Oxide and Zinc Cell in Caustic Soda: 10 Hours at over an Ampere (Boy Mechanic, 1913)
Volt

Criado por

Volt

14. novembro 2026SE
8
0
0
0
0

Copper-Oxide and Zinc Cell in Caustic Soda: 10 Hours at over an Ampere (Boy Mechanic, 1913)

A strong, steady wet cell for experiments: black copper oxide with a little manganese oxide and iron filings in a tin can at the bottom of a jar, a zinc hung above it, and 10 per cent caustic soda under a film of oil; it gives over an ampere for about 10 hours.
Intermediário
An hour

Instruções

1

Recipe in metric

A carregar o notebook Jupyter…
2

Read the Boy Mechanic

"A cell of battery that will run 10 hours with an output of over 1 ampere can be made as follows."
3

Bottom electrode

Solder a connecting wire to the lower half of a tin can and set it in the bottom of a jar about 4 in across and 8 in high. Fill the can with 2 oz black copper oxide, 1 oz black manganese oxide and some iron filings.

Materiais para este passo:

Frasco de vidroFrasco de vidro1 peça
LataLata1 peça
Fio de cobreFio de cobre1 peça
Solda de estanho-chumboSolda de estanho-chumbo1 peça
Óxido de cobreÓxido de cobre1 peça
Dióxido de manganês (pirolusite)Dióxido de manganês (pirolusite)1 peça
Limalha de ferroLimalha de ferro1 peça

Ferramentas necessárias:

Ferro de soldarFerro de soldar
4

Zinc

Hang a small zinc (he used a crowfoot zinc) about 1 in above the half can, its wire led out of the jar.

Materiais para este passo:

Chapa de zincoChapa de zinco1 peça
Fio de cobreFio de cobre1 peça
5

Electrolyte

Wearing goggles and gloves, fill the jar to within 1 in of the top with 10 per cent caustic soda solution, then float a thin layer of kerosene or paraffin oil on top to keep out the air.

Materiais para este passo:

Hidróxido de sódio em solução a 10 %Hidróxido de sódio em solução a 10 %1 peça
QueroseneQuerosene1 peça

Ferramentas necessárias:

Óculos de proteção químicaÓculos de proteção química
Luvas resistentes a produtos químicosLuvas resistentes a produtos químicos
6

Renew

When exhausted, siphon off the oil first, then renew the solution and the oxide.

Materiais para este passo:

Hidróxido de sódio em solução a 10 %Hidróxido de sódio em solução a 10 %1 peça
Óxido de cobreÓxido de cobre1 peça

Ferramentas necessárias:

Tubo de trasfegaTubo de trasfega
7

Troubleshooting

Cell troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), pp. 150-151, by Robert Canfield (checked on the archive.org scan boymechanic0000unse_n5a8). Metric figures, the Lalande-type note and safety gear are ours.

Materiais

10

Ferramentas necessárias

4

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...