Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)
Forge

Criado por

Forge

14. novembro 2026NO
4
0
0
0
0

Claw Crowbar: a Round Iron Bar with Steeled Chisel Ends, One Split Hot and Bent into a Claw (Edwinson, 1886)

The builder's and fencer's crowbar from George Edwinson's smithing series (Amateur Work, 1886): a round iron bar 2 to 5 ft long with steel-pointed ends, one forged to a chisel, the other split hot into a fork and bent over into a nail-drawing claw, tempered purple.
Intermediário
Half a day at the forge

Instruções

1

His sizes

A carregar o notebook Jupyter…
2

Read Edwinson

"It is an ordinary round bar of iron with steel-pointed ends."
3

Choose the bar

Take round bar iron of 1, 1 1/4 or 1 1/2 in (25, 32 or 38 mm), 2 to 5 ft (0.6-1.5 m) long. A bar of best tool steel may be lighter.

Materiais para este passo:

Barra de ferro forjadoBarra de ferro forjado1 peça

Ferramentas necessárias:

Talhadeira a quenteTalhadeira a quente
4

Steel the ends (ours, after his pick method)

Split each end hot, weld a steel wedge into the cleft under borax and draw it out, as for a pick point.

Materiais para este passo:

Aço de cadinhoAço de cadinho1 peça
Bórax em póBórax em pó1 peça

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
Talhadeira a quenteTalhadeira a quente
BigornaBigorna
MarretaMarreta
Tenazes de ferreiroTenazes de ferreiro
5

Forge the chisel end

Forge one end to a chisel shape. Keep the steel no hotter than red and hammer it lightly at that heat.

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
BigornaBigorna
MarteloMartelo
Tenazes de ferreiroTenazes de ferreiro
6

Forge the claw

Forge the other end to a chisel shape too, split it hot into a fork with the hot chisel, and bend the fork over to form the claw. For a quarryman's bar leave out the claw and bend one chisel end over as a short lever.

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
Talhadeira a quenteTalhadeira a quente
BigornaBigorna
MarteloMartelo
Tenazes de ferreiroTenazes de ferreiro
7

Harden and temper

Harden the steeled ends and temper them to a purple, the best tint for crowbars.

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
Balde de têmperaBalde de têmpera
8

Troubleshooting

Crowbar troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and fig. 220. The steel wedges follow his pick method; the metric figures and tools are ours.

Materiais

3

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...