ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Machete to a Relief Specification
Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Avançado
Factory process
Instruções
1
1
Forge the blade
Forge the blade
Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.
Materiais para este passo:
Lingote de aço de alto carbono1 peçaFerramentas necessárias:
Forja de ferreiro
Martinete2
2
Harden and temper
Harden and temper
Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.
Ferramentas necessárias:
Forja de ferreiro
Durómetro Rockwell3
3
Fit the handle
Fit the handle
Fit the wooden handle into the grooves and fix it with three steel rivets and washers.
Materiais para este passo:
Barrote de madeira dura para cabos1 peça
Rebites de aço3 peças
Anilha plana3 peças4
4
Check
Check
Check the edge for dents and the hardness near the edge.
Ferramentas necessárias:
Durómetro RockwellMateriais
4- Referência
- Referência
- 3 peçasReferência
- 3 peçasReferência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


