Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Fitzwilliam Girth: 5 in Web With Four Buckles and an Ordinary Girth Through Two Loops (Hasluck, Saddlery, 1904)
Hasluck calls the Fitzwilliam girth "a very safe girth" that "keeps the saddle steady in place": a broad 5 in web with a buckle in each corner, and an ordinary girth running through a loop near each end. This is his girth from Saddlery (1904). He gives no length for the wide web; the picture is our diagram from his text.
Intermediário
About 4 hours
Instruções
1
1
His sizes in centimetres
His sizes in centimetres
A carregar o notebook Jupyter…
2
2
Read Saddlery, ch. V
Read Saddlery, ch. V
"A Fitzwilliam girth is made of web 5 in. wide, the ends being bound with leather and a chape and buckle placed on each side—that is, in each corner, two at each end of the girth."
3
3
Bind the ends and fit four buckles
Bind the ends and fit four buckles
Cut the 5 in web to the length of girth needed (he gives no length). Bind both ends with leather, and put a chape and girth buckle in each corner: two at each end, four in all.
Materiais para este passo:
Fita de cilha1 peça
Couro para arreios1 peça
Fivela de cilha4 peças
Fio de linho1 peça
Cera de abelha1 peçaFerramentas necessárias:
Faca para couro
Sovela
Duas agulhas de correeiro
Torno de seleiro
Fita métrica4
4
Put on the loops and the ordinary girth
Put on the loops and the ordinary girth
Put a 1 in loop across the girth 5 in from the end, at each end. Stitch each loop across twice at each end, leaving an opening in the middle for an ordinary girth to pass. Make a single ordinary girth (see the web saddle girth) and put one end through each of the loops; the Fitzwilliam girth is then complete.
Materiais para este passo:
Couro para arreios1 peça
Fio de linho1 peça
Cera de abelha1 peça
Cilha de sela1 peçaFerramentas necessárias:
Faca para couro
Forma de passadores
Sovela
Duas agulhas de correeiro
Torno de seleiro
Fita métrica5
5
Troubleshooting
Troubleshooting
Fitzwilliam girth troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, Fitzwilliam girth, p. 48; read on the scan. He gives no length for the 5 in web and has no figure of this girth, so the picture is our own diagram from his text. He adds that chape punches cut chapes at one stroke, or a head knife can cut partly round or cornered patterns. The thread, tools and metric figures are ours.
Materiais
6- 1 peçaReferência
- 2 peçasReferência
- 4 peçasReferência
- 2 peçasReferência
- 2 peçasReferência
- 1 peçaReferência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


