Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Inked Fabric Printer Ribbon: Tricresyl Phosphate, Castor Oil and Carbon Black Ink (Neidich, Underwood, US 2,139,092)
Charlie

Criado por

Charlie

31. outubro 2026DE
9
0
0
0
0

Inked Fabric Printer Ribbon: Tricresyl Phosphate, Castor Oil and Carbon Black Ink (Neidich, Underwood, US 2,139,092)

Ribbon inks made with plain oils went thin in warm weather and rancid with age, so the ribbon printed unevenly and soon dried out. Neidich replaced half the oil with tricresyl phosphate, which keeps the ink at an even thickness and does not oxidise. Result: a fabric ribbon saturated with a non-drying black ink for typewriters and printers. Source: Neidich, US 2,139,092 (Underwood Elliott Fisher, 1938). Not given: which fibre the ribbon is woven from (he says only an absorbent fabric), how the ink is put on. Picture drawn by Youblob.
Intermediário
2 hours

Instruções

1

Weigh the ink

Parts by weight: tricresyl phosphate 50, castor oil 50, carbon black 20, Prussian blue toning base 20. Neidich allows some variation.

Materiais para este passo:

Fosfato de tricresilaFosfato de tricresila50 parts
Óleo de rícino (prensado a frio, sem hexano)Óleo de rícino (prensado a frio, sem hexano)50 parts
Pó de negro de fumoPó de negro de fumo20 parts
Azul da PrússiaAzul da Prússia20 parts

Ferramentas necessárias:

Moinho trituradorMoinho triturador
2

Grind the pigments into the oils

Grind the carbon black and Prussian blue with the tricresyl phosphate and castor oil in a mill until the colour is spread evenly through the ink.

Ferramentas necessárias:

Moinho trituradorMoinho triturador
3

Take an absorbent ribbon fabric

Use a woven ribbon of absorbent fabric. Neidich does not say which fibre or width.

Materiais para este passo:

Tecido de fita sem tintaTecido de fita sem tinta1 as required

Ferramentas necessárias:

TesouraTesoura
4

Saturate the ribbon

Saturate the ribbon with the ink. Neidich says only that it is applied as usual. Ours: run it through the ink and squeeze it between rollers so it is evenly wet, not dripping.

Ferramentas necessárias:

Par de rolos de revestimento por imersãoPar de rolos de revestimento por imersão

Materiais

5

Ferramentas necessárias

3

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...