ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Kimono Waist with Printable Pattern (Fales, 1917)
Tex

Criado por

Tex

20. novembro 2026FO
1
0
0
0
0

Kimono Waist with Printable Pattern (Fales, 1917)

Jane Fales's kimono waist (Dressmaking, 1917): front, back and sleeves in one piece, one seam each side, gathered into a belt. Draft it to your own measures from your Wardrobe, or print six of today's sizes nested (bust 84-104 cm), seams on; then lay out and cut.
Iniciante
About half a day

Instruções

1

Draft your pattern

Draft Fales's kimono waist to your own measures from your Wardrobe, taken as she describes (lengths of back, front and underarm, width of back, bust, neck, neck to wrist and to elbow, elbow and hand), or in today's sizes B84-B104, then print on A4 or US Letter.

Materiais para este passo:

PapelPapel1 as required

Ferramentas necessárias:

Fita métricaFita métrica
Impressora de jato de tintaImpressora de jato de tinta
TesouraTesoura
Fita de máscaraFita de máscara
2

Lay out and cut

Centre front on a lengthwise fold; the opening is at the centre back (Fales p.235). Opened out the waist is wider than 150 cm cloth: cut the sleeve ends apart on the piecing line and add 2.5 cm to both edges. Seams are on the pattern. Belt: tape or a band of the cloth, your waist + 5-8 cm (p.236). Ours: about 1.4 m of 150 cm cloth.
Passo 2 - Image 1

Materiais para este passo:

Tecido de algodão (leve)Tecido de algodão (leve)1 1.4 m x 150 cm (ours)
Fita de sarja de algodãoFita de sarja de algodão1 waist + 8 cm

Ferramentas necessárias:

TesourãoTesourão
Alfinetes de costuraAlfinetes de costura
Fita métricaFita métrica

Materiais

3

Ferramentas necessárias

6

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...