ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Ladies' Shorts with Printable Pattern (Simons, 1945)
Tex

Criado por

Tex

21. novembro 2026FO
2
0
0
0
0

Ladies' Shorts with Printable Pattern (Simons, 1945)

Harry Simons's ladies' shorts (Drafting Trousers, 1945): a continuous waistband cut on, a vee each side of the front, wide legs to just above the knee. Draft it to your own tailor's measures from your Wardrobe, or print his six women's sizes nested (waist 71-91 cm), seams and ease on; then lay out and cut.
Intermediário
About half a day

Instruções

1

Draft your pattern

Draft Simons's shorts to your own measures from your Wardrobe (trouser waist, hips, side length to the top of the band, and inside leg), or in his sizes W28-W36, then print on A4 or US Letter.

Materiais para este passo:

PapelPapel1 as required

Ferramentas necessárias:

Fita métricaFita métrica
Impressora de jato de tintaImpressora de jato de tinta
TesouraTesoura
Fita de máscaraFita de máscara
2

Lay out and cut

Grain lines on the lengthwise thread; a pair of fronts and a pair of backs. Seams, ease, the band and a 4 cm hem are on the pattern. Cut two waistband facings 7 cm wide and half your waist + 7.5 cm long. Ours: about 1.1 m of 150 cm cloth (W30).
Passo 2 - Image 1

Materiais para este passo:

Tecido de gangaTecido de ganga1 1.1 m x 150 cm (W30, ours)

Ferramentas necessárias:

TesourãoTesourão
Alfinetes de costuraAlfinetes de costura
Fita métricaFita métrica

Materiais

2
  • 1 as required
    Referência
  • 1 1.1 m x 150 cm (W30, ours)
    Referência

Ferramentas necessárias

6

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...