Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Leather Modeling Tool from a Nut Pick (Boy Mechanic, 1913)
Hyde

Criado por

Hyde

14. novembro 2026AR
4
0
0
0
0

Leather Modeling Tool from a Nut Pick (Boy Mechanic, 1913)

A tool for pressing outlines into damp leather, made from an ordinary kitchen nut pick by rubbing its point smooth and rounded with fine emery paper so it marks the leather without cutting it.
Iniciante
Twenty minutes

Instruções

1

Read the Boy Mechanic

"It is called a modeling tool for leather and may be purchased, or, one can be made from an ordinary nut pick."
2

Dull the point

Rub the sharp point and edges of a nut pick with fine emery paper until they are smooth and rounded and will not cut leather.

Materiais para este passo:

Punção para nozesPunção para nozes1 peça
Lixa de esmerilLixa de esmeril1 peça
3

Use it

Dampen the leather on the back with as much water as it will take without showing on the face. Lay it on a level, non-absorbent surface, put the paper pattern on top, and trace the lines through the paper with the tool, using a straightedge for straight lines.

Materiais para este passo:

Couro para arreiosCouro para arreios1 peça

Ferramentas necessárias:

RéguaRégua
4

Troubleshooting

Modeling tool troubleshooting.

Flow

Loading...
5

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), p. 351 (checked on the archive.org scan boymechanic0000unse_n5a8).

Materiais

3

Ferramentas necessárias

1
  • Referência

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...