Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Oscilloscope: Two-Channel Digital, with a Delay per Channel and a Common Delay (Anritsu, US 4,727,288, 1988)
Ed

Criado por

Ed

3. novembro 2026FI
8
0
0
0
0

Oscilloscope: Two-Channel Digital, with a Delay per Channel and a Common Delay (Anritsu, US 4,727,288, 1988)

A two-channel digital oscilloscope. Each channel has its own converter and delay circuit. One knob, with a main and a sub button, sets the delays. The sub button shifts only the sub channel's wave, so you can line it up against the main one. The main button shifts both waves together and keeps the gap between them. Result: a 2-channel digital oscilloscope that can move both traces along the time base without losing their phase difference. Source: K. Nakatsugawa et al. (Anritsu), US 4,727,288 (1988). Unknown: sample rate, bandwidth, memory size and the display. Picture: the patent drawing.
Especialista
Unknown

Instruções

1

Convert the two channels

Bring the main channel and the sub channel each to its own analog-to-digital converter. Ours: BNC sockets. Not given: the sample rate, the bandwidth.

Materiais para este passo:

Conversor analógico-digitalConversor analógico-digital2 main and sub converters
Conjunto de conectores coaxiais (BNC / SO-239)Conjunto de conectores coaxiais (BNC / SO-239)1 input sockets

Ferramentas necessárias:

Ferro de soldarFerro de soldar
Descarnador de fiosDescarnador de fios
2

Delay, store and display

Pass each channel's digital signal through its own delay circuit, whose delay is set by its own delay value setting device. Store both delayed signals in a wave memory and show them on the display. Ours: logic ICs for the delay circuits and setting devices, IC memory, and a CRT driven through D/A converters. Not given: how the delay circuits are built, the memory size, the display.

Materiais para este passo:

Sortido de circuitos integrados lógicosSortido de circuitos integrados lógicos1 delay circuits and setting devices
Memória de circuitos integradosMemória de circuitos integrados1 wave memory
Conversor digital-analógicoConversor digital-analógico2 display drive
Tubo de raios catódicosTubo de raios catódicos1 display

Ferramentas necessárias:

Ferro de soldarFerro de soldar
Descarnador de fiosDescarnador de fios
3

Build the delay panel and processor

Make a delay operation panel with a main switch, a sub switch and one dial, with an encoder on the dial so each turn is read as a change in its output. Connect the panel to a microprocessor with a common memory that holds the sub channel's delay S in one area and the main channel's delay M in another. Mount it all in a case with its supply. Ours: push buttons, an aluminium case, a DC supply.

Materiais para este passo:

Botão de pressãoBotão de pressão2 main and sub switches
Codificador rotativoCodificador rotativo1 delay dial
MicroprocessadorMicroprocessador1 command devices
Memória de circuitos integradosMemória de circuitos integrados1 common memory
Caixa de alumínioCaixa de alumínio1 case

Ferramentas necessárias:

Fonte de alimentação de corrente contínuaFonte de alimentação de corrente contínua
Engenho de furarEngenho de furar
Ferro de soldarFerro de soldar
4

Program the two commands

When the dial turns, read the encoder change e and which switch is held. Sub switch: add e to S, set the sum in the sub channel's setting device and store it back as the new S. Main switch: add e to both M and S, set M + e in the main channel's device and S + e in the sub channel's, and store both back. The main command so moves both channels by the same amount and keeps their relative delay.

Ferramentas necessárias:

Ferro de soldarFerro de soldar
5

Compare two waves

Feed two signals in. Hold the sub switch and turn the dial to slide the sub channel's wave against the main one. Then hold the main switch and turn the dial: both waves move along the time base together, with the phase difference between them unchanged. Test it with a known signal.

Ferramentas necessárias:

Gerador de funçõesGerador de funções

Materiais

10

Ferramentas necessárias

5

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...