Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Expanding Book Support: Lazy-Tongs Between Two End Pieces, Locked by a Thumb-Nut (Roseboom, 1901)
Jesse Roseboom of Cincinnati received US 668,961, dated 26 February 1901, for a book support that fills any gap on a shelf. Two end pieces are joined by a lazy-tongs; set it between the books and the shelf's side, open it until the books stand up firmly, and tighten a thumb-nut on the centre bolt, where two roughened disks lock the levers.
We make it from hardwood and flat bar. All sizes are ours.
Iniciante
About 3 hours
Instruções
1
1
How far it opens
How far it opens
A carregar o notebook Jupyter…
2
2
Read US 668,961
Read US 668,961
"It is placed between two sets of books on a shelf or the like or between a row of books and an upright of the shelf, and the connection B is then expanded, so as to press the end pieces against the upright and the adjacent book, after which the connection is adjustably fixed."
3
3
Make the end pieces
Make the end pieces
Cut two hardwood end pieces about as tall as your books' lower half (ours), his end pieces A, and sand them. Screw a small butt hinge to the middle of each inner face, his hinge-plates E, with the knuckle upright.
Materiais para este passo:
Tábua de madeira de lei1 peça
Dobradiça de livro2 peças
Parafusos para madeira1 peçaFerramentas necessárias:
Serrote
Lixa
Conjunto de chaves de fendas4
4
Make the levers
Make the levers
Cut two long levers C and four short levers D of flat bar, round the ends and drill them at the notebook's centres. Drill the long levers at their middles for the bolt. File two washers rough on one face and fix one to each long lever round its centre hole, his corrugated disks H.
Materiais para este passo:
Barra chata de aço macio1 peça
Anilha plana1 peçaFerramentas necessárias:
Serra de arco para metais
Jogo de limas
Engenho de furar
Jogo de brocas
Torno de bancada5
5
Assemble the lazy-tongs
Assemble the lazy-tongs
Bolt the long levers together at their centres with the rough faces meeting and a wing nut on the bolt, his bolt F and thumb-nut G. Rivet a short lever to each arm end of the long levers, loosely so they turn, and rivet the other ends of each pair to the free leaf of an end piece's hinge. The long levers' ends should bear on the end pieces and keep them upright.
Materiais para este passo:
Parafuso de cabeça cilíndrica com sextavado interior1 peça
Porca borboleta1 peça
Rebites de aço1 peçaFerramentas necessárias:
Martelo de bola
Punção de centro
Chave inglesa ajustável6
6
Use it
Use it
Set it in the gap on the shelf, open it until both end pieces press the books and the shelf's side, and tighten the wing nut. Loosen the nut to close it up and move it.
7
7
Troubleshooting
Troubleshooting
Book support troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
**Jesse Roseboom** of Cincinnati, US 668,961, dated 26 February 1901, filed 7 August 1900. He claimed "a book-support for use on shelves and the like, comprising end pieces, and the long and short levers interposed between the end pieces; the long levers being pivotally connected together, and the short levers being pivotally connected to the arms of the long levers, and to the end pieces", and the roughened meeting faces with bolt and nut. He gives no sizes; the hardwood, flat bar, hinges as his hinge-plates, rivets and all sizes are ours.
Materiais
8- 1 peçaReferência
- 2 peçasReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- Referência
- 1 peçaReferência
- 1 peçaReferência
Ferramentas necessárias
11- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


