ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Sand Bath in a Sunk Iron Pan
Forge

Criado por

Forge

14. outubro 2026NO
18
0
0
0
0

Sand Bath in a Sunk Iron Pan

A sand bath is a pan of sand set over the heat. A flask or dish bedded in the sand is warmed on all sides, not just on the bottom. Alchemists already used it. Here a shallow pan is hammered from iron sheet into a hollow and then filled with sieved sand. The picture: our diagram of a flask bedded in sand in an iron pan over a fire.
Iniciante
A day

Instruções

1

Cut the disc

Scribe a circle on the iron sheet with the dividers and cut it out with the snips. File the edge smooth.

Materiais para este passo:

Chapa de ferro (martelada)Chapa de ferro (martelada)1 peça

Ferramentas necessárias:

Compasso de pontasCompasso de pontas
Tesoura de chapaTesoura de chapa
Lima para metalLima para metal
Luvas de soldadorLuvas de soldador
2

Carve a hollow

Gouge a shallow round hollow into the end grain of a hardwood block, about as deep as the pan will be.

Ferramentas necessárias:

Bloco de madeira duraBloco de madeira dura
Goiva para madeiraGoiva para madeira
Maço de madeiraMaço de madeira
3

Sink the pan

Hold the disc over the hollow and hammer it down in rings from the rim toward the centre, turning it as you go. Sinking stretches and thins the sheet, so go evenly. If the iron stiffens, heat it red in the forge and let it cool before going on.

Ferramentas necessárias:

Bloco de madeira duraBloco de madeira dura
Martelo de bolaMartelo de bola
Forja de ferreiroForja de ferreiro
Tenazes de ferreiroTenazes de ferreiro
Luvas de soldadorLuvas de soldador
4

Flatten the bottom

Planish the bottom flat on the anvil so the pan sits steady over the fire, and file the rim level.

Ferramentas necessárias:

BigornaBigorna
Martelo de bolaMartelo de bola
Lima para metalLima para metal
5

Fill with sand

Sieve the sand, dry it by heating it in the pan, and leave a layer about 3 cm deep.

Materiais para este passo:

AreiaAreia2 kg

Ferramentas necessárias:

CrivoCrivo
Forja de ferreiroForja de ferreiro
6

Use it

Set the pan over the heat and bed the flask or dish partly in the sand. The sand carries the heat to all sides of the vessel.

Ferramentas necessárias:

Luvas de soldadorLuvas de soldador
7

How big a disc

A carregar o notebook Jupyter…

Materiais

2

Ferramentas necessárias

12

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...