Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Sodium Hydroxide Solution: Normal Caustic Soda, 40 g per Litre (Sutton, 1904)
The standard normal (1 M) caustic soda solution for titration: 40 g NaOH in each litre. Make it a little too strong, check it against normal acid, bring it to exact strength and keep it away from the air, which it takes carbon dioxide from.
Result: normal sodium hydroxide solution, its strength proved by titration.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), p. 48. Picture: that page of the book.
Iniciante
Unknown
Instruções
1
1
Dissolve the caustic soda
Dissolve the caustic soda
Dissolve pure caustic soda in distilled water until the solution has a specific gravity of about 1.05, about 50 g to the litre: a little stronger than normal (40 g to the litre). Expose it to the air as little as possible.
Materiais para este passo:
Hidróxido de sódio — grau laboratorial1 about 50 g per litre
Água destilada1 solventFerramentas necessárias:
Proveta graduada2
2
Titrate and adjust
Titrate and adjust
Estimate its strength roughly with normal acid and methyl orange. Then titrate 50 ml of it exactly against normal acid and adjust it to exact normal strength. Methyl orange works cold even if the solution has taken up some carbon dioxide; with litmus or phenolphthalein, titrate boiling. Not given: the dilution, implied by the adjustment. Ours: hydrochloric acid as the normal acid; methyl orange as the pH indicator solution.
Ferramentas necessárias:
Ácido clorídrico
Solução indicadora de pH
Bureta (de vidro)
Pipeta3
3
Store it
Store it
Once its strength is settled, keep it in a bottle that shuts out the air, or in full bottles with their glass stoppers lightly greased with vaseline.
Ferramentas necessárias:
Garrafa de vidro (transparente)
VaselinaMateriais
2- 1 about 50 g per litreReferência
- 1 solventReferência
Ferramentas necessárias
7- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Materiais de Blueprints conectados
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


