Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Test-Tube Hydrometer, Shot-Loaded and Calibrated (Boy Mechanic, 1915)
A hydrometer for specific gravity made from two test tubes: the small one, weighted with shot set in plaster and corked, floats in the liquid held in the large one, and the depth it sinks is read against marks copied from a bought hydrometer.
Iniciante
An hour plus calibration
Instruções
1
1
How it floats
How it floats
A carregar o notebook Jupyter…
2
2
Read the Boy Mechanic
Read the Boy Mechanic
"The specific gravity of any material is the ratio of the weights of equal volumes of the material and water."
3
3
Mount the jar
Mount the jar
Take two test tubes, one able to hold the other. Stand the large one upright in a hole bored in a small block of wood: it holds the liquid.
Materiais para este passo:
Tubos de ensaio1 peça
Tábua de madeira de lei1 peçaFerramentas necessárias:
Arco de pua e broca4
4
Load the float
Load the float
Put shot or other heavy metal in the bottom of the small tube until it floats upright: almost wholly under water if it is for liquids heavier than water, only just upright if for lighter ones. Fix the load with a little plaster of Paris.
Materiais para este passo:
Tubos de ensaio1 peça
Lingote de chumbo1 peça
Gesso de estuque1 peça5
5
Seal it
Seal it
Push a small cork into the open end and seal it with shellac, or with resin or sealing wax melted over it with a hot soldering iron.
Materiais para este passo:
Rolhas1 peça
Verniz de goma-laca1 peça
Resina de pinheiro1 peçaFerramentas necessárias:
Ferro de soldar6
6
Mark the water line
Mark the water line
Float it in the large tube filled with pure water (rain water will do, distilled is better) and file a small mark level with the surface. In lighter liquids the mark sinks below the surface; in heavier ones it rises above.
Materiais para este passo:
Água destilada1 peçaFerramentas necessárias:
Limas (lima de mão)7
7
Calibrate
Calibrate
Float your tube and a borrowed hydrometer in the same liquid and mark your tube to match its readings. Starting with a heavy liquid, add water little by little; both float lower each time, giving more marks.
Materiais para este passo:
Água destilada1 peçaFerramentas necessárias:
Limas (lima de mão)8
8
Troubleshooting
Troubleshooting
Hydrometer troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 456 (checked on the archive.org scan boymechanicbook200chic2). Lead ingot stands in for his shot; the float numbers are our example.
Materiais
8- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 2 peçasReferência
Ferramentas necessárias
3- Referência
- 2 vendors sell this, none ship to you yetReferência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

