ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
YourGrandma

Criado por

YourGrandma

30. setembro 2026IS
14
0
0
0
0

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring

A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace. James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws. This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
Intermediário
About 4 hours

Instruções

1

The ring's screws

A carregar o notebook Jupyter…
2

A hinged squeezer before it

The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3

Read US 104,159

"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B." "This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4

Make the handles and set the bowl

**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B. **Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it. **Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle. **Press.** Screw a hardwood dome to the upper handle so it closes into the bowl. **Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.

Materiais para este passo:

LataLata1 peça
Chapa de folha de flandresChapa de folha de flandres1 peça
Solda de canalização sem chumboSolda de canalização sem chumbo1 peça
FundenteFundente1 peça
Tábua de madeira de leiTábua de madeira de lei1 peça
Bloco de madeira duraBloco de madeira dura1 peça
Dobradiça de livroDobradiça de livro1 peça
Parafusos para madeiraParafusos para madeira8 peças
LimãoLimão2 peças

Ferramentas necessárias:

Tesoura de chapaTesoura de chapa
PregosPregos
MarteloMartelo
Ferro de soldarFerro de soldar
SerroteSerrote
Conjunto de formões para madeiraConjunto de formões para madeira
Berbequim sem fiosBerbequim sem fios
Jogo de brocasJogo de brocas
GrosaGrosa
Conjunto de chaves de fendasConjunto de chaves de fendas
Faca de cozinhaFaca de cozinha
CopoCopo
Luvas de trabalho em couroLuvas de trabalho em couro
5

A bowl that rocks, leaks or will not come out

Ring-set lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened. **Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.

Materiais

9

Ferramentas necessárias

13

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...