Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Smith's Work Furnace of Rammed Clay With a Bellows Hole Through a Wooden Back (Theophilus, 12th Century)
Forge

Criado por

Forge

14. novembro 2026NO
7
0
0
0
0

Smith's Work Furnace of Rammed Clay With a Bellows Hole Through a Wooden Back (Theophilus, 12th Century)

The medieval workshop forge from Theophilus's De Diversis Artibus (12th century): a wooden back fixed in the ground by the wall with a finger-size bellows hole, a box of boards four fingers apart rammed two-thirds full of fresh-dug clay, then a hearth of clay and horse dung, pierced through the hole for the bellows tube. "In this manner compose all smith's furnaces."
Iniciante
About 1 day plus drying

Instruções

1

His measures

A carregar o notebook Jupyter…
2

Read De Diversis Artibus, Book III

"Near the wall, by the window, on the left side of the person sitting, a piece of wood is fixed in the ground."
3

Set the wooden frame

Fix a piece of wood firmly in the ground near the wall, three feet long and scarcely two fingers thick, with a finger-size hole through it four fingers above the ground. Peg on in front a straight piece four fingers wide and as long. In front of this fasten another of equal breadth and length so there is a space of four fingers between them, held outside by two or three stakes.

Materiais para este passo:

Tábua de madeira de leiTábua de madeira de lei3 peças
Estaca de madeiraEstaca de madeira3 peças
Vareta de madeira (cavilha)Vareta de madeira (cavilha)1 peça

Ferramentas necessárias:

SerroteSerrote
Arco de pua e brocaArco de pua e broca
MarteloMartelo
PáPá
4

Ram the clay

Take clay newly dug, not beaten nor mixed with water, put a little into the space and ram it hard with a rounded piece of wood, then more, until two parts of the space are filled and the third left empty. Take away the front wood, cut the clay level in front and on top with a long knife, and beat it hard with a thin piece of wood.

Materiais para este passo:

ArgilaArgila1 peça

Ferramentas necessárias:

Faca para couroFaca para couro
Maço de madeiraMaço de madeira
5

Make the hearth

Beat clay mixed with horse dung and make the furnace and its hearth, covering the wall so the fire cannot burn it. Pierce the clay with a slender stick through the hole in the back wood, for the bellows tube.

Materiais para este passo:

ArgilaArgila1 peça
Estrume animalEstrume animal1 peça

Ferramentas necessárias:

Maço de madeiraMaço de madeira
PáPá
6

Dry it

Put the bellows tube in the hole, lay fire and charcoal at the back and front, and blow to dry the furnace.

Ferramentas necessárias:

FoleFole
7

Troubleshooting

Furnace troubleshooting.

Flow

Loading...
8

History and honest limits

From Theophilus, **De Diversis Artibus**, Book III, chapter III, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, p. 211). The finger-to-centimetre figures, the tools and the diagram are ours.

Materiais

5

Ferramentas necessárias

7

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...