Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)
Forge

Criado por

Forge

14. novembro 2026NO
6
0
0
0
0

Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)

The goldsmith's bellows from Theophilus's De Diversis Artibus (12th century): a ram skin stripped off whole through an opening behind, stuffed with straw and dried, cured a day and two nights in lye and salt, stretched, oiled, and fitted with a wooden head and iron tube at the neck, four sticks across the back, and a thumb loop and finger loop to work it.
Intermediário
About 4 days

Instruções

1

Schedule

A carregar o notebook Jupyter…
2

Read De Diversis Artibus, Book III

"Then make bellows from the skins of rams, thus: When the rams are killed, the skins must not be cut under the belly, but they are opened behind."
3

Strip and cure the skin

Open the ram's skin behind, not under the belly, and turn it so it strips off whole. Fill it with straw and dry it moderately. Lay it in lye and salt for a day and two nights.

Materiais para este passo:

Pele de ovelhaPele de ovelha1 peça
PalhaPalha1 peça
Barrela de cinza de madeiraBarrela de cinza de madeira1 peça
SalSal1 peça

Ferramentas necessárias:

Faca para couroFaca para couro
Balde de 20 litrosBalde de 20 litros
4

Stretch and oil

On the third day stretch it lengthwise, but more in breadth. Anoint it (tallow is our choice) and stretch it again.

Materiais para este passo:

SeboSebo1 peça
5

Fit the head and tube

Make a wooden head that passes through the skin's neck and bind it there; bore it for an iron tube (rolled from sheet iron, our method).

Materiais para este passo:

Tábua de madeira de leiTábua de madeira de lei1 peça
Chapa de ferro (martelada)Chapa de ferro (martelada)1 peça
Fio de jutaFio de juta1 peça

Ferramentas necessárias:

SerroteSerrote
Arco de pua e brocaArco de pua e broca
Faca para couroFaca para couro
MarteloMartelo
6

Fit the back and loops

Across the back opening place four pieces of wood: two joined together and fixed in the middle, two sewn onto the skin, so the joins come above and below. Sew on two loops of the same skin, a smaller one above for the thumb and a larger one below for the other four fingers.

Materiais para este passo:

Tábua de madeira de leiTábua de madeira de lei1 peça
Fio de linhoFio de linho1 peça

Ferramentas necessárias:

SovelaSovela
Duas agulhas de correeiroDuas agulhas de correeiro
Faca para couroFaca para couro
SerroteSerrote
7

Use

Put the iron tube in the hole of the furnace, lay fire and charcoal at the back and front, and blow, first to dry the new furnace.
8

Troubleshooting

Bellows troubleshooting.

Flow

Loading...
9

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapter IV, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 211-213). He gives no sizes and does not say what the skin is anointed with; tallow, the rolled sheet-iron tube, the tools and the diagram are ours.

Materiais

9

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...