Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Thompson (Nlaka'pamux) Sinew-Backed Bow: Juniper Stave, Sinew Glued to the Belly Then Bent Back, Cherry-Bark Grip (Teit, 1900)
Woody

Criado por

Woody

15. novembro 2026NO
5
0
0
0
0

Thompson (Nlaka'pamux) Sinew-Backed Bow: Juniper Stave, Sinew Glued to the Belly Then Bent Back, Cherry-Bark Grip (Teit, 1900)

The best hunting bow of the Thompson (Nlaka'pamux) people, from James Teit: a juniper stave with deer sinew glued along its hollow side, then bent right over by two men so the sinewed side becomes the back, giving a bow that lies flat unstrung; the grip narrowed and wrapped with bitter-cherry bark, and a string of deer back-sinew.
Avançado
A week or two, mostly glue drying

Instruções

1

Read Teit

"When the glue has set, two men bend the bow over so that what was originally the concave side becomes the back of the bow."
2

Shape the stave

Shape a stave of juniper (the Lower Thompsons also used hemlock, yew and dogwood), flat in section (Fig. 216 c), the middle a little narrower for the hand. Ours: about 1.2-1.4 m long.

Materiais para este passo:

Aduela de madeira duraAduela de madeira dura1 peça

Ferramentas necessárias:

Faca de dois cabosFaca de dois cabos
FacaFaca
3

Glue on the sinew

Lay deer sinew in glue along the stave's concave side and let the glue set fully. Ours: shred dried back sinew into fibres, soak it, lay it overlapping in warm hide glue, and let it dry a week or more.

Materiais para este passo:

Cordel de tendãoCordel de tendão1 peça
Cola de pele animalCola de pele animal1 peça
ÁguaÁgua1 peça

Ferramentas necessárias:

Chaleira de ferroChaleira de ferro
FogueiraFogueira
4

Bend it over

Two people bend the bow over against its curve so the sinewed side becomes the back. Teit's Fig. 216 lies perfectly flat with the string off and takes its working curve when strung.

Ferramentas necessárias:

CordaCorda
5

Grip, string and finish

Wrap the narrow middle with what Teit calls bird-cherry bark (ours: taken as bitter cherry, Prunus emarginata). Make a string of twisted deer back-sinew (Apocynum twine served when sinew was short). Bows were often painted, or had incised lines filled with red on the flat inner side.

Materiais para este passo:

Casca de cerejeira-amargaCasca de cerejeira-amarga1 peça
Fio de tendãoFio de tendão1 peça

Ferramentas necessárias:

FacaFaca
6

Troubleshooting

Bow troubleshooting.

Flow

Loading...
7

History and honest limits

From James Teit, *The Thompson Indians of British Columbia*, **Memoirs of the American Museum of Natural History, Jesup North Pacific Expedition** vol. I part IV (1900), pp. 239-241 and Figs. 216-221 (checked on the archive.org scan cihm_16242). He also describes bows wrapped with cherry bark instead of sinew (weaker), a snakeskin-covered birch bow, plain bows for birds, and a hand-guard for the thumb. Length, sinew preparation and glue are ours.

Materiais

6

Ferramentas necessárias

5

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...