Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Timber Beams Hewn Square from the Log
Before sawmills, beams for frames and machines were hewn square from the log with axes. Snap a chalk line, score notches down to it, knock out the wood between them (juggling), then hew the face smooth to the line with a broadaxe. Turn the log and do each side.
The picture: shipwrights with broadaxes hewing timbers for a ship, about 1915–1920 (Bain News Service, Library of Congress).
Intermediário
A day per beam
Instruções
1
1
Set the log up and mark
Set the log up and mark
Block the log off the ground so it cannot roll. Mark the beam's outline on both ends with the square and snap chalk lines along the log between them.
Materiais para este passo:
Tronco1 peçaFerramentas necessárias:
Esquadro fixo
Cordão de marcar2
2
Score
Score
Stand on the log and chop notches every 30 cm or so, almost down to the line.
Ferramentas necessárias:
Machado
Capacete de obra3
3
Juggle
Juggle
Knock off the blocks of wood between the notches with the axe, leaving a rough face just short of the line.
Ferramentas necessárias:
Machado4
4
Hew to the line
Hew to the line
Hew the face smooth to the chalk line with the broadaxe, working from the bottom of the stem upward.
Ferramentas necessárias:
Machado de falquejar5
5
Turn and repeat
Turn and repeat
Roll the log a quarter turn, snap new lines from the end marks, and hew the next face. Check the corners with the square; dress any high spots with the adze.
Ferramentas necessárias:
Cordão de marcar
Esquadro fixo
Enxó6
6
The biggest beam in a log
The biggest beam in a log
A carregar o notebook Jupyter…
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.



