合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Acid Into Water, Never Water Into Acid: Why the Order Is Not a Preference
Charlie

创建者

Charlie

24. 九月 2026DE
41
0
0
0
0

Acid Into Water, Never Water Into Acid: Why the Order Is Not a Preference

Diluting a strong acid RELEASES HEAT — a great deal of it. Concentrated sulfuric acid and water together can reach boiling point in seconds, and what boils is not the acid but the small amount of water that got there first. That is the whole reason for the order. Pour acid into a large volume of water and the heat is spread through all of it, raising the temperature a little. Pour water into acid and the first drops land in a pool of acid, boil instantly, and spit concentrated acid back out of the vessel. The rule people remember it by is crude and effective: **do as you oughta, add acid to water.** It applies to every strong acid and to concentrated alkali solutions too, and it is not a laboratory formality — it is the difference between a warm beaker and a face.
中级
2 hours

说明

1

Put the water in first, and have enough of it

Measure the water into the vessel before the acid bottle is opened. The water should be most of the final volume, so that when the acid arrives there is plenty of cold liquid to absorb the heat. Use a vessel much larger than the final volume — half full at most. Heat makes the liquid move, and a vessel filled to the brim has nowhere to put that movement. Borosilicate, not ordinary glass. The temperature can rise fast enough to crack soda-lime glass through thermal shock, and a cracked beaker of hot acid is the worst possible way to learn the difference.

此步骤所需材料:

蒸馏水蒸馏水1 升

所需工具:

硼硅玻璃烧杯硼硅玻璃烧杯
量筒量筒
化学防溅护目镜化学防溅护目镜
丁腈橡胶手套丁腈橡胶手套
2

Add the acid slowly, down a stirring rod, with stirring

Pour the acid in a thin stream down a glass stirring rod held against the inside of the vessel, so it runs down the wall rather than dropping in. Stir continuously throughout. Both of those do the same job: they stop a pocket of concentrated acid sitting at the bottom and getting hot on its own. Acid is denser than water and will sink and stay there unless it is mixed, and a hot layer under a cold one is exactly what makes a vessel spit. Stop and let it cool if it becomes hot to the touch through the glass. There is no hurry, and adding the second half of the acid to a beaker that is already at 70 degrees removes all the margin the first half bought you.

此步骤所需材料:

蒸馏水蒸馏水1 升

所需工具:

玻璃搅拌棒玻璃搅拌棒
硼硅玻璃烧杯硼硅玻璃烧杯
化学防溅护目镜化学防溅护目镜
丁腈橡胶手套丁腈橡胶手套
3

Goggles, gloves, and a sink with running water nearby

Splash goggles, not safety glasses. Glasses stop things coming from the front; an acid that spits comes up and around, and it is the eye that cannot be washed clean afterwards. Nitrile gloves and long sleeves, and work at a sink or where running water is within a step or two. The response to acid on skin is a great deal of cold water immediately and for far longer than feels necessary — fifteen minutes, not fifteen seconds. Keep a container of sodium bicarbonate on the bench for spills on surfaces, NOT for spills on skin. Neutralising an acid releases heat and gas, and on skin that adds a thermal burn to a chemical one. Water, and plenty of it, is the answer for people; bicarbonate is for the bench.

此步骤所需材料:

碳酸氢钠碳酸氢钠1 个
水水1 升

所需工具:

化学防溅护目镜化学防溅护目镜
丁腈橡胶手套丁腈橡胶手套
实验室洗瓶实验室洗瓶
4

Label it the moment it exists

Write the label before you walk away: what it is, how concentrated, the date, and your initials. An unlabelled beaker of clear liquid is indistinguishable from water, and that is how people get hurt by something they made themselves. Label the vessel, not the lid. Lids get swapped, and a correctly labelled lid on the wrong bottle is worse than no label at all. The same line goes in the notebook: what was mixed, in what order, how much heat there was, whether it needed cooling. That is what makes the next batch predictable rather than a fresh experiment.

此步骤所需材料:

不干胶标签不干胶标签1 个

所需工具:

油性记号笔油性记号笔

材料

4

所需工具

7

CC0 公共领域

此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品,无需征得许可。

通过购买蓝图中的产品支持创客,他们将获得 创客佣金 (由供应商设定),或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。

讨论

(0)

登录 加入讨论

加载评论中...