合作
艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Plywood Sheet: Sawn Veneer Cross-Laid with Hide Glue
Plywood is thin wood laid in layers with the grain of each crossing the next, an odd number so the sheet stays flat; it splits less and swells less than solid board. Glued with hot hide glue, the woodworking glue of veneering since antiquity, and pressed flat overnight.
The picture: our diagram of the crossed plies.
中级
A day, plus a night under pressure
说明
1
1
Cut the leaves
Cut the leaves
Cut five veneer leaves a little larger than the finished sheet: three with the grain running one way, two across.
此步骤所需材料：
木皮贴片5 张所需工具：
手工刀
直尺规
卷尺2
2
Heat the glue
Heat the glue
Warm the hide glue in a double boiler to about 60 °C. It gels as it cools, so work steadily.
此步骤所需材料：
兽皮胶0.2 公斤
水0.3 升所需工具：
双层隔水锅
速读温度计3
3
Lay up crossed
Lay up crossed
Brush glue on one face of each inner leaf and stack them, turning each leaf's grain at right angles to the one below; both outside leaves run the same way.
所需工具：
涂胶刷4
4
Press overnight
Press overnight
Put the stack between flat boards straight away and load it with weights or clamps evenly over the whole area. Leave it overnight.
所需工具：
平压木板（一对）
压榨用重物
C 形夹5
5
Trim
Trim
Saw the edges square and plane off squeezed-out glue.
所需工具：
手锯
手刨直尺规6
6
Plies and thickness
Plies and thickness
正在加载 Jupyter 笔记本…
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。