艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Rocking Two-Section Barrel Churn: Cream Falls Through a Grate as the Barrel Tips End Over End
McLaughlin knew oscillating churns already existed; he claimed the way he built and hung his.
John McLaughlin of Goshen, Ohio, received US 9,117, dated 13 July 1852, for a churn barrel "composed of two sections, within a metallic clasp band, united to pivoted pendant bars," with "a grate J, composed of a circular rim and crossed bars" at the joint. A lever rocks it so the milk or cream is "carried up in one section, and allowed to descend, through a grate, into the lower section." Turned upright on a leg, the upper section lifts off to fill it.
This rung looks at the fall, then prints the grate and coupling ring, joins two containers into a barrel, hangs it on a frame, and makes butter.
中级
About 4 hours, plus printing
说明
1
1
The fall
The fall
正在加载 Jupyter 笔记本…
2
2
A rocking churn with a perforated diaphragm before it
A rocking churn with a perforated diaphragm before it
The embedded blueprint rocks a box through a perforated diaphragm. McLaughlin rocks a two-section barrel through a grate, far enough to tip it end over end.
3
3
Read US 9,117
Read US 9,117
"The operator then grasps the handle or lever N, and oscillates the barrel so as to present its ends uppermost, the one after the other, carrying the cream upward, and allowing it to descend through the grate into the lower section."
4
4
Print the parts
Print the parts
Print the grate (/uploads/blueprints/rocking-two-section-barrel-churn-grate.stl) and the coupling ring (/uploads/blueprints/rocking-two-section-barrel-churn-coupling-ring.stl); both need a 200 mm bed. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
此步骤所需材料：
PETG线材1 个所需工具：
FDM 3D 打印机5
5
The barrel
The barrel
Take two identical round food-safe containers about 170 mm across. Join them mouth to mouth inside the coupling ring with the grate between, sealed with a food-safe gasket of leather; clamp with a strap. Fit a plug in one for drawing off the buttermilk.
此步骤所需材料：
食品级贮存容器2 个
皮条1 个
软木塞1 个所需工具：
充电式电钻
开孔器套装6
6
Frame and lever
Frame and lever
Build a pine base with two uprights. Hang two pine bars from pivots near the uprights' tops, joined below by a round, and screw a metal strap round the barrel's middle to them as the clasp band. Extend one bar upward as the hand lever.
此步骤所需材料：
松木板1 个
硬木销钉1 个
低碳钢圆棒1 个
#8 × 1 英寸木螺钉1 个
机螺钉1 个所需工具：
手锯充电式电钻
钻头套装
螺丝刀套装7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the two sections cut away to show the grate at their joint, the clasp band on the pendant bars, the uprights, base and lever.
8
8
Rock and make butter
Rock and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Rock the barrel end over end with the lever; time until the butter comes. Draw off the buttermilk, then open the barrel. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
此步骤所需材料：
鲜奶油1500 毫升
粗海盐1 个
水1 个所需工具：
留置式探针温度计
秒表
数字厨房秤
大号不锈钢搅拌盆9
9
A barrel that leaks, a grate that clogs
A barrel that leaks, a grate that clogs
Rocking two-section barrel troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**John McLaughlin** of Goshen, Clermont County, Ohio, received US 9,117, dated 13 July 1852. His sections were each like an ordinary dasher churn tub, one fitting within the other; a clamp screw through the clasp band bore on a plate on the barrel's head. He did not claim oscillating churns, only mounting the two-section barrel with its grate in the clasp band on pivoted pendant bars.
**Honest limits.** Two food-safe containers and printed parts stand in for his tubs. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
材料
12- 1 个占位符
- 2 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1 个占位符
- 1500 毫升占位符
- 1 个占位符
- 1 个占位符
所需工具
10- 占位符
- 1 vendor sell this, none ship to you yet占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
- 占位符
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。