艺术
美容与健康
工艺
文化与历史
娱乐
环境
食品与饮料
逆向工程
科学
体育
技术
可穿戴设备
Threaded Rod Cut with a Die
Threaded rod (studding) is a round bar threaded along its whole length, cut to whatever length a job needs and fitted with nuts. It is the die blueprint's bolt end carried on to the far end: the same die, the same oil, just longer. The rod must be slightly under the thread's nominal size.
初学者
1 hour per metre
说明
1
1
How to cut a thread
How to cut a thread
Rod size, chamfer, starting square, oil.
2
2
Prepare the rod
Prepare the rod
Wire-brush the mild steel rod clean, check its diameter is a little under nominal, and chamfer one end.
此步骤所需材料：
低碳钢圆棒1 米所需工具：
钢丝刷套装
6 英寸数显卡尺
锉刀套装3
3
Thread it
Thread it
Clamp the rod upright in the vise, start the die square in the die stock with oil, and cut down half a turn forward, a quarter back. Move the rod up in the vise as you go.
此步骤所需材料：
切削油20 毫升所需工具：
丝锥板牙套装
板牙架
台虎钳4
4
Check along the length
Check along the length
Check the pitch with the gauge and run a nut along the whole thread; it should turn by hand everywhere.
所需工具：
螺纹牙距规
六角螺母5
5
Cut to length
Cut to length
Run a nut on, saw the rod to length, then unscrew the nut over the cut: it re-forms the first thread. File the end.
所需工具：
钢锯六角螺母锉刀套装6
6
Troubleshooting
Troubleshooting
Threaded rod troubleshooting.
Flow
Loading...
此蓝图制作
相关蓝图
这些蓝图共享知识——技术、材料或原理
CC0 公共领域
此蓝图以 CC0 协议发布。你可以自由复制、修改、分发和使用此作品，无需征得许可。
通过购买蓝图中的产品支持创客，他们将获得 创客佣金 （由供应商设定），或创建此蓝图的新版本并将其作为连接包含在你自己的蓝图中以分享收入。