Zusammenarbeit
KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)
Forge

Erstellt von

Forge

14. November 2026NO
7
0
0
0
0

Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)

The goldsmith's bellows from Theophilus's De Diversis Artibus (12th century): a ram skin stripped off whole through an opening behind, stuffed with straw and dried, cured a day and two nights in lye and salt, stretched, oiled, and fitted with a wooden head and iron tube at the neck, four sticks across the back, and a thumb loop and finger loop to work it.
Fortgeschritten
About 4 days

Anweisungen

1

Schedule

Jupyter-Notebook wird geladen …
2

Read De Diversis Artibus, Book III

"Then make bellows from the skins of rams, thus: When the rams are killed, the skins must not be cut under the belly, but they are opened behind."
3

Strip and cure the skin

Open the ram's skin behind, not under the belly, and turn it so it strips off whole. Fill it with straw and dry it moderately. Lay it in lye and salt for a day and two nights.

Materialien für diesen Schritt:

SchaffellSchaffell1 Stück
StrohStroh1 Stück
HolzaschenlaugeHolzaschenlauge1 Stück
SalzSalz1 Stück

Benötigte Werkzeuge:

LedermesserLedermesser
20-Liter-Eimer20-Liter-Eimer
4

Stretch and oil

On the third day stretch it lengthwise, but more in breadth. Anoint it (tallow is our choice) and stretch it again.

Materialien für diesen Schritt:

TalgTalg1 Stück
5

Fit the head and tube

Make a wooden head that passes through the skin's neck and bind it there; bore it for an iron tube (rolled from sheet iron, our method).

Materialien für diesen Schritt:

HartholzbrettHartholzbrett1 Stück
Eisenblech (geschmiedet)Eisenblech (geschmiedet)1 Stück
JutegarnJutegarn1 Stück

Benötigte Werkzeuge:

HandsägeHandsäge
Bohrwinde mit BohrerBohrwinde mit Bohrer
LedermesserLedermesser
HammerHammer
6

Fit the back and loops

Across the back opening place four pieces of wood: two joined together and fixed in the middle, two sewn onto the skin, so the joins come above and below. Sew on two loops of the same skin, a smaller one above for the thumb and a larger one below for the other four fingers.

Materialien für diesen Schritt:

HartholzbrettHartholzbrett1 Stück
LeinenfadenLeinenfaden1 Stück

Benötigte Werkzeuge:

AhleAhle
Zwei SattlernadelnZwei Sattlernadeln
LedermesserLedermesser
HandsägeHandsäge
7

Use

Put the iron tube in the hole of the furnace, lay fire and charcoal at the back and front, and blow, first to dry the new furnace.
8

Troubleshooting

Bellows troubleshooting.

Flow

Loading...
9

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapter IV, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 211-213). He gives no sizes and does not say what the skin is anointed with; tallow, the rolled sheet-iron tube, the tools and the diagram are ours.

Materialien

9
  • 1 Stück
    Platzhalter
  • 1 Stück
    Platzhalter
  • Platzhalter
  • 1 Stück
    Platzhalter
  • 1 Stück
    Platzhalter
  • Platzhalter
  • Platzhalter
  • 1 Stück
    Platzhalter
  • 1 Stück
    Platzhalter

Benötigte Werkzeuge

7

Dieser Bauplan stellt her

CC0 Gemeinfrei

Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.

Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.

Diskussion

(0)

Anmelden um an der Diskussion teilzunehmen

Kommentare werden geladen...