Colaboración
ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Principiante
Unknown
Instrucciones
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Materiales para este paso:
Pletina de acero dulce1 turning toolsHerramientas necesarias:
Sierra para metales
Martillo
Yunque
Lima para metal2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Materiales para este paso:
Tabla de pino1 board support
Espiga de madera1 turning stick
Clavos de hierro1 stick pointHerramientas necesarias:
Sierra para metalesLima para metalMartillo3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Materiales para este paso:
Tabla de madera dura1 ribsHerramientas necesarias:
Sierra para metalesLima para metalMateriales
5- 1 turning toolsMarcador de posición
- 1 board supportMarcador de posición
- 1 turning stickMarcador de posición
- 1 stick pointMarcador de posición
- 1 ribsMarcador de posición
Materiales de Blueprints conectados
10% de atribución
Mild Steel Bar Stock Forged from an Ingot
por Forge
Moderno
43
0
0
0
5
0
10% de atribución
Pine Boards with a Chainsaw Mill
por Woody
Carpintería
43
0
0
0
1
0
10% de atribución
Riven Hardwood Dowels with a Dowel Plate
por Woody
Carpintería
54
0
0
0
1
0
10% de atribución
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
por Forge
Uñas
61
0
0
0
3
0
Este plano hace
CC0 Dominio público
Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.
Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.