ARTE
BELLEZA Y BIENESTAR
ARTESANÍA
CULTURA E HISTORIA
ENTRETENIMIENTO
MEDIO AMBIENTE
COMIDA Y BEBIDAS
INGENIERÍA INVERSA
CIENCIAS
DEPORTES
TECNOLOGÍA
TECNOLOGÍA VESTIBLE
The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It
YourGrandma

Creado por

YourGrandma

30. septiembre 2026IS
35
0
0
0
0

The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It

A flat squeezer presses only the middle of the lemon's cut face, and the rind at its edge keeps its juice. John Klepzig of San Francisco, California, received US 84,125, dated 17 November 1868, for "forming an opening in one of the squeezing-levers. A movable button, which is operated by a spiral spring, is placed in the opening, and, by placing the fruit between the two levers, and closing them, the juice is expressed, through the hole in the bottom, into the tumbler, while the rind of the lemon is pressed closely against the face of the button-lever, completely enclosing the button." A projection on the other lever pushes the fruit down onto the button. This rung works out the lever's force and the spring's share, with a work check, then makes the levers in hardwood with a sprung, grooved button and a hollow stem, and squeezes lemons over a tumbler.
Intermedio
About 4 hours

Instrucciones

1

Lever and spring

Cargando el cuaderno de Jupyter…
2

A hinged squeezer before it

The embedded blueprint squeezes the lemon between two cups on crossed handles. Klepzig uses two hinged levers and lets a sprung button give way under the fruit.
3

Read US 84,125

"A and B are the two levers, connected by a hinge, C. The lever A has a projection, D, so that when the two levers are shut together, the small end of the button E, which sets in the openings in the lever B, is forced out." "The segregated half of the fruit is placed against the spring-button, and the opposite lever, having the projection, is brought down upon the small end, which presses the rind down upon the smooth surface of the button-lever, completely surrounding the button, and bearing down the spring, which forces out the stem, while the juice of the fruit passes through the centre hole, H, into the tumbler. The face of the button is concave and has grooves centring to the opening."
4

Make the levers and squeeze lemons

**Levers.** Cut two 25 cm levers from hardwood board, shaped like Klepzig's with handles at one end, and join the other ends with a butt hinge as C. **Button seat.** Drill a 45 mm stepped hole through lever B, 7 cm from the hinge, narrower at the back to leave a ledge. **Button.** Turn or rasp a hardwood button that slides in the hole, with a concave face carved with grooves running to a centre hole, and fix a short length of tube through its centre as the stem G, passing through the narrow back of the hole. Put a compression spring round the stem, resting on the ledge. **Projection.** Glue a rounded hardwood knob to lever A opposite the button as the projection D. **Test.** Seal the wood with food-safe oil. Hold the squeezer over a tumbler, lay a half lemon cut face down on the button, close the levers and press. Weigh the juice against a half squeezed on a flat board.

Materiales para este paso:

Tabla de madera duraTabla de madera dura1 pieza
Bloque de madera duraBloque de madera dura2 piezas
Bisagra de libroBisagra de libro1 pieza
Tornillos para maderaTornillos para madera6 piezas
Tubo de aluminioTubo de aluminio0.05 metro
Surtido de muelles de compresiónSurtido de muelles de compresión1 pieza
Cola de carpinteroCola de carpintero1 pieza
LimónLimón2 piezas

Herramientas necesarias:

SerruchoSerrucho
Taladro inalámbricoTaladro inalámbrico
Juego de brocasJuego de brocas
Juego de formones para maderaJuego de formones para madera
EscofinaEscofina
Papel de lijaPapel de lija
Juego de destornilladoresJuego de destornilladores
Cuchillo de cocinaCuchillo de cocina
Báscula digital de cocinaBáscula digital de cocina
VasoVaso
5

A button that sticks, leaks or does not wrap the rind

Spring-button lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**John Klepzig** of San Francisco, California, received US 84,125, dated 17 November 1868. The opening in lever B was smaller at the back than at the face, leaving a ledge on which the spiral spring F rested, and the small end or tube G attached to the button passed through the lesser hole. His claim is the movable button with its opening and spiral spring, with the two levers. **Honest limits.** Hardwood levers, a carved button and a bought spring stand in for his made-up parts. The notebook ignores friction; its forces, lengths and spring are examples. Your juice weights are the result.

Materiales

8

Herramientas requeridas

10

CC0 Dominio público

Este Blueprint se publica bajo CC0. Eres libre de copiar, modificar, distribuir y usar este trabajo para cualquier propósito, sin pedir permiso.

Apoya al Maker comprando productos a través de su Blueprint, donde gana una Comisión del Maker establecida por los vendedores, o crea una nueva iteración de este Blueprint e inclúyela como conexión en tu propio Blueprint para compartir ingresos.

Discusión

(0)

Iniciar sesión para unirte a la discusión

Cargando comentarios...