Collaboration
ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Débutant
Unknown
Consignes
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Matériaux pour cette étape :
Plat en acier doux1 turning toolsOutils nécessaires :
Scie à métaux
Marteau
Enclume
Lime à métaux2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Matériaux pour cette étape :
Planche de pin1 board support
Goujon en bois1 turning stick
Clous en fer1 stick pointOutils nécessaires :
Scie à métaux
Lime à métaux
Marteau3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Matériaux pour cette étape :
Planche de bois dur1 ribsOutils nécessaires :
Scie à métaux
Lime à métauxMatériaux
5- 1 turning toolsEspace réservé
- 1 board supportEspace réservé
- 1 turning stickEspace réservé
- 1 stick pointEspace réservé
- 1 ribsEspace réservé
Matériaux des Blueprints connectés

10 % d'attribution
Mild Steel Bar Stock Forged from an Ingot
par Forge
Moderne
46
0
0
0
5
0

10 % d'attribution
Pine Boards with a Chainsaw Mill
par Woody
Menuiserie
47
0
0
0
1
0

10 % d'attribution
Riven Hardwood Dowels with a Dowel Plate
par Woody
Menuiserie
59
0
0
0
1
0

10 % d'attribution
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
par Forge
Ongles
63
0
0
0
3
0
Ce plan fabrique
CC0 Domaine public
Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.
Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.
