ART
BEAUTÉ ET BIEN-ÊTRE
ARTISANAT
CULTURE ET HISTOIRE
DIVERTISSEMENT
ENVIRONNEMENT
NOURRITURE ET BOISSONS
INGÉNIERIE INVERSE
SCIENCES
SPORTS
TECHNOLOGIE
TECHNOLOGIE PORTABLE
Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles
Woody

Créé par

Woody

6. octobre 2026NO
3
0
0
0
0

Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles

The Hights made the wings of a horizontal box-churn dash into a screw. Cornelius R. Hight and John Hight of Geneva, Illinois, received US 7,490, dated 9 July 1850, for a "reacting spiral revolving dash" in a box churn: a shaft with four arms, those at one end at right angles to those at the other, and two wings fastened from arm to arm "so as to produce a quarter twist in the wings as they extend along the shaft." Its revolution produces "opposite currents, in the cream"; reversed, "the butter collects at the ends of the wings." This rung works out the wings' pitch, then prints the dash in one piece, fits it in a box, and makes butter.
Intermédiaire
About 3 hours, plus printing

Consignes

1

The quarter twist

Chargement du notebook Jupyter…
2

Oblique wings on a horizontal arbor before it

The embedded blueprint sets straight wings at 30° to the axle. The Hights twist theirs a quarter turn from end to end, like a screw.
3

Read US 7,490

"The peculiar construction of the dash, consists in setting the arms to which the wings are attached, at right angles, upon opposite sides of the shaft, so as to produce a quarter twist in the wings as they extend along the shaft from one arm to the other."
4

Print the dash

Print the dash on end in one piece with supports (/uploads/blueprints/quarter-twist-spiral-dash-churn-dash.stl): shaft, four arms and two wings each twisted a quarter turn. Print the crank arm (/uploads/blueprints/quarter-twist-spiral-dash-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Matériaux pour cette étape :

Filament PETGFilament PETG1 pièce

Outils nécessaires :

Imprimante 3D à filament (FDM)Imprimante 3D à filament (FDM)
5

Fit the box

Take a food-safe box about 220 × 150 × 160 mm, its proportions close to his 18 × 12 × 13 inches. Drill both ends on the axis 80 mm up. Push a 10 mm square hardwood shaft through one end, the dash and the other end, with a leather washer at each.

Matériaux pour cette étape :

Contenant de stockage de qualité alimentaireContenant de stockage de qualité alimentaire1 pièce
Goujons de bois durGoujons de bois dur1 pièce
Bande de cuirBande de cuir1 pièce

Outils nécessaires :

Perceuse sans filPerceuse sans fil
Jeu de foretsJeu de forets
Scie égoïneScie égoïne
6

Crank and lid

Glue the crank arm and a dowel handle on the shaft's outer end, and fit the box's lid, as his rabbeted cover.

Matériaux pour cette étape :

Goujons de bois durGoujons de bois dur1 pièce
Colle à boisColle à bois1 pièce

Outils nécessaires :

Papier abrasifPapier abrasif
7

The patent drawing

US 7,490 drawing sheet, public domain (expired patent).
Étape 7 - Image 1
8

Churn, then reverse to collect

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank steadily; time until the butter comes. Then reverse the crank so the butter collects at the ends of the wings, as they said. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Matériaux pour cette étape :

Crème liquide entièreCrème liquide entière1500 ml
Gros sel marinGros sel marin1 pièce
EauEau1 pièce

Outils nécessaires :

Thermomètre à sonde à demeureThermomètre à sonde à demeure
ChronomètreChronomètre
Balance de cuisine numériqueBalance de cuisine numérique
Grand cul-de-poule en acier inoxydableGrand cul-de-poule en acier inoxydable
9

Wings that scrape, butter that won't collect

Quarter-twist spiral dash troubleshooting.

Flow

Loading...
10

History and honest limits

**Cornelius R. Hight and John Hight** of Geneva, Kane County, Illinois, received US 7,490, dated 9 July 1850. Their wings could be wood or tin, split into the arms with a saw and fastened with brads or small screws; the wing's inner border was cut to arcs of 16- and 23-inch circles; the dash ran on a coupling gudgeon in a cast box and a screw pivot. They wrote it made butter "in from 5 to 8 minutes"; that is their claim, not our measurement. They claimed the application of a reacting spiral revolving dash to a box churn or any of the usual forms of churns. **Honest limits.** A food-safe box and a printed dash stand in for theirs, and our wings twist evenly rather than following their curved borders. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

Matériaux

8

Outils requis

9

CC0 Domaine public

Ce blueprint est publié sous CC0. Vous êtes libre de copier, modifier, distribuer et utiliser ce travail pour tout usage, sans demander la permission.

Soutenez le Maker en achetant des produits via son Blueprint où il perçoit une Commission Maker définie par les Vendeurs, ou créez une nouvelle itération de ce Blueprint et incluez-le comme connexion dans votre propre Blueprint pour partager les revenus.

Commentaires

(0)

Se connecter pour participer à la discussion

Chargement des commentaires...