Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Monorail Sled: Two Tandem Plank Runners Shod With Strap Iron, Steered Lying Down (Boy Mechanic, 1915)
Harry Hardy's monorail sled from The Boy Mechanic, Book 2 (1915): two plank runners one behind the other under a 6 ft board, shod with square-edged strap iron that grips like a skate. The rider lies full length and steers the front runner with a bar, balancing like a cyclist.
Menengah
About 1 day
Instruksi
1
1
His sketch in centimetres
His sketch in centimetres
Memuat notebook Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"Round iron or half-round iron should not be used, as these are liable to skid. The square, sharp edges of the strap iron prevent this and grip the surface just as a skate."
3
3
Cut and shoe the runners
Cut and shoe the runners
Cut the two runners from 1 in plank to the size and shape of his sketch: the front runner 2 ft long, the rear one 2-1/2 ft long and about 1 ft high (the sketch prints the rear length with an inch mark; it is drawn as 2-1/2 ft). Shoe them with strap iron 1 in wide and 1/4 in thick, keeping the edges square and sharp.
Material untuk langkah ini:
Papan Kayu Keras1 buah
Besi Strip Baja Lunak1 buah
Sekrup kayu1 buahAlat yang dibutuhkan:
Gergaji Tangan
Gergaji Coping
Gergaji Besi
Ragum Meja
Bor tangan
Pensil
Meteran Gulung4
4
Fit the rear runner
Fit the rear runner
Nail or bolt blocks on either side of the upper edge of the rear runner and screw the top board (6 ft long, 1 in thick) to them. Brace the runner with strap iron, as in the sketch.
Material untuk langkah ini:
Papan pinus1 buah
Papan Kayu Keras1 buah
Besi Strip Baja Lunak1 buah
Baut kepala bulat leher persegi1 buah
Sekrup kayu1 buahAlat yang dibutuhkan:
Gergaji Tangan
Gergaji Besi
Bor tangan
Palu5
5
Fit the front runner and steering
Fit the front runner and steering
Fit the front runner the same way, but with only one pair of blocks at the centre and a thin piece of wood on their tops as the fifth wheel. Bore the hole for the steering post 6 in from the front end of the top, a little larger than the post. Round the post where it passes through the hole and leave its upper end square, to take the steering bar tightly.
Material untuk langkah ini:
Papan Kayu Keras1 buah
Besi Strip Baja Lunak1 buah
Sekrup kayu1 buahAlat yang dibutuhkan:
Gergaji Tangan
Bor engkol dan mata bor
Pahat kayu
Ketam tangan6
6
Troubleshooting
Troubleshooting
Monorail sled troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "How to Make a Monorail Sled" by Harry Hardy, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 50). The rear runner length is printed 2-1/2 with an inch mark but drawn longer than the 2 ft front runner, so it is read here as 2-1/2 ft. He gives no sizes for the blocks, braces or steering bar. The tools and metric figures are ours.
Bahan
5- 1 buahPlaceholder
- 1 buahPlaceholder
- 3 buahPlaceholder
- 1 buahPlaceholder
- Placeholder
Alat yang Diperlukan
11- Placeholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Cetak biru ini membuat
Blueprint terkait
Blueprint ini berbagi pengetahuan — teknik, bahan, atau prinsip
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.


