Kolaborasi
SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI

Glass Delivery Tube: Cut and Bent over a Broad Flame (Frary, 1914)
A delivery tube is just glass tube cut square and bent to lead gas or vapour where it is wanted. A single clean scratch and a pull give a square break; a broad flame and a turning tube give an even bend that does not kink.
Result: a bent glass delivery tube for gas generators, stills and similar apparatus.
Source: F. C. Frary, C. S. Taylor and J. D. Edwards, Laboratory Manual of Glass-Blowing (1914), pp. 7-9. Unknown: the tube's shape and size, which depend on the apparatus. Picture: a drawn diagram.
Pemula
Unknown
Instruksi
1
1
Cut the tube square
Cut the tube square
Grind an old flat file into a glass-knife, its edges sharp with a 30 to 60 degree bevel. Scratch the cold tube once with it; never saw back and forth. Pull the ends apart while bending the tube very slightly to open the crack. For large or thin-walled tube, touch a red-hot glass bead, 1/16 to 1/8 inch, to the scratch to start the crack round. If the glass is hot, use a file with its edge moistened.
Material untuk langkah ini:
Tabung kaca1 delivery tube stockAlat yang dibutuhkan:
Kikir Logam2
2
Bend it in a broad flame
Bend it in a broad flame
Heat the tube in a broad flame, turning it on its axis all the time, and let it bend mostly under its own weight. For large tube, stopper one end and bend with great care. If the bend starts to collapse or deform, blow it gently back into shape, reheating that spot. Frary uses a fish-tail burner for most work and a blast lamp for large tube. Ours: the bench blast lamp for both. Not given: the shape and sizes.
Alat yang dibutuhkan:
Obor peniup kaca meja
Sumbat gabusBahan
1- 1 delivery tube stockPlaceholder
Alat yang Diperlukan
3- Placeholder
- Placeholder
- Placeholder
Bahan cetak biru terhubung
Cetak biru ini membuat
CC0 Domain Publik
Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.
Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.


