SENI
KECANTIKAN & KESEHATAN
KERAJINAN
BUDAYA & SEJARAH
HIBURAN
LINGKUNGAN
MAKANAN & MINUMAN
REKAYASA BALIK
ILMU PENGETAHUAN
OLAHRAGA
TEKNOLOGI
PERANGKAT PAKAI
Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles
Woody

Dibuat oleh

Woody

6. Oktober 2026NO
3
0
0
0
0

Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles

The Hights made the wings of a horizontal box-churn dash into a screw. Cornelius R. Hight and John Hight of Geneva, Illinois, received US 7,490, dated 9 July 1850, for a "reacting spiral revolving dash" in a box churn: a shaft with four arms, those at one end at right angles to those at the other, and two wings fastened from arm to arm "so as to produce a quarter twist in the wings as they extend along the shaft." Its revolution produces "opposite currents, in the cream"; reversed, "the butter collects at the ends of the wings." This rung works out the wings' pitch, then prints the dash in one piece, fits it in a box, and makes butter.
Menengah
About 3 hours, plus printing

Instruksi

1

The quarter twist

Memuat notebook Jupyter…
2

Oblique wings on a horizontal arbor before it

The embedded blueprint sets straight wings at 30° to the axle. The Hights twist theirs a quarter turn from end to end, like a screw.
3

Read US 7,490

"The peculiar construction of the dash, consists in setting the arms to which the wings are attached, at right angles, upon opposite sides of the shaft, so as to produce a quarter twist in the wings as they extend along the shaft from one arm to the other."
4

Print the dash

Print the dash on end in one piece with supports (/uploads/blueprints/quarter-twist-spiral-dash-churn-dash.stl): shaft, four arms and two wings each twisted a quarter turn. Print the crank arm (/uploads/blueprints/quarter-twist-spiral-dash-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Material untuk langkah ini:

Filamen PETGFilamen PETG1 buah

Alat yang dibutuhkan:

Pencetak 3D filamen (FDM)Pencetak 3D filamen (FDM)
5

Fit the box

Take a food-safe box about 220 × 150 × 160 mm, its proportions close to his 18 × 12 × 13 inches. Drill both ends on the axis 80 mm up. Push a 10 mm square hardwood shaft through one end, the dash and the other end, with a leather washer at each.

Material untuk langkah ini:

Wadah penyimpanan mutu panganWadah penyimpanan mutu pangan1 buah
Pasak kayu kerasPasak kayu keras1 buah
Jalur kulitJalur kulit1 buah

Alat yang dibutuhkan:

Bor Tanpa KabelBor Tanpa Kabel
Set Mata BorSet Mata Bor
Gergaji TanganGergaji Tangan
6

Crank and lid

Glue the crank arm and a dowel handle on the shaft's outer end, and fit the box's lid, as his rabbeted cover.

Material untuk langkah ini:

Pasak kayu kerasPasak kayu keras1 buah
Lem KayuLem Kayu1 buah

Alat yang dibutuhkan:

AmplasAmplas
7

The patent drawing

US 7,490 drawing sheet, public domain (expired patent).
Langkah 7 - Image 1
8

Churn, then reverse to collect

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank steadily; time until the butter comes. Then reverse the crank so the butter collects at the ends of the wings, as they said. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Material untuk langkah ini:

Krim kentalKrim kental1500 ml
Garam Laut KasarGaram Laut Kasar1 buah
AirAir1 buah

Alat yang dibutuhkan:

Termometer probe tinggal-pasangTermometer probe tinggal-pasang
StopwatchStopwatch
Timbangan Dapur DigitalTimbangan Dapur Digital
Mangkuk aduk baja nirkarat (besar)Mangkuk aduk baja nirkarat (besar)
9

Wings that scrape, butter that won't collect

Quarter-twist spiral dash troubleshooting.

Flow

Loading...
10

History and honest limits

**Cornelius R. Hight and John Hight** of Geneva, Kane County, Illinois, received US 7,490, dated 9 July 1850. Their wings could be wood or tin, split into the arms with a saw and fastened with brads or small screws; the wing's inner border was cut to arcs of 16- and 23-inch circles; the dash ran on a coupling gudgeon in a cast box and a screw pivot. They wrote it made butter "in from 5 to 8 minutes"; that is their claim, not our measurement. They claimed the application of a reacting spiral revolving dash to a box churn or any of the usual forms of churns. **Honest limits.** A food-safe box and a printed dash stand in for theirs, and our wings twist evenly rather than following their curved borders. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

Bahan

8

Alat yang Diperlukan

9

CC0 Domain Publik

Cetak biru ini dirilis di bawah CC0. Anda bebas untuk menyalin, memodifikasi, mendistribusikan, dan menggunakan karya ini untuk tujuan apa pun, termasuk komersial, tanpa meminta izin.

Dukung Maker dengan membeli produk melalui Cetak Biru mereka di mana mereka mendapatkan Komisi Pembuat yang ditetapkan oleh Penjual, atau buat iterasi baru dari Cetak Biru ini dan masukkan sebagai koneksi di milik Anda sendiri.

Diskusi

(0)

Masuk untuk bergabung dengan diskusi

Memuat komentar...