LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Double-Concave Perforated Disk Dasher: Two Tin Domes With Half-Covered Holes
Marsh improved the dasher of "the plain old-fashioned churns so long used by farmers generally."
Joseph Marsh of Petersburg, Menard County, Illinois, received US 7,527, dated 30 July 1850, for a "double-concave perforated discoid churn-dasher": two convex pieces of tin or other suitable material, "perforated and placed on the upright," about six inches across with holes about three-quarters of an inch, "the several holes in B made to cover about half of the several holes in C." It works in a straight-sided churn by raising and pushing it, or by a lever.
This rung works out the open area, then prints the two domes and spacer, fits them to a staff, and makes butter.
Byrjandi
About 1 hour, plus printing
Leiðbeiningar
1
1
Half-covered holes
Half-covered holes
Hleð Jupyter-vinnubók…
2
2
An improved common dasher before it
An improved common dasher before it
The embedded blueprint improves the common dasher with pitched oars. Marsh uses two perforated domes whose holes half overlap.
3
3
Read US 7,527
Read US 7,527
"The convex pieces of tin, as shown at B and C, are or may be six inches in diameter, and the several holes in the same about three-quarters of an inch in diameter, the several holes in B made to cover about half of the several holes in C."
4
4
Print the domes
Print the domes
Print the two domes: 152 mm across with 19 mm holes, the second turned so its holes half cover the first's. Print the spacer ring. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Efni fyrir þetta skref:
PETG-þráður1 stykkiNauðsynleg verkfæri:
FDM-þrívíddarprentari5
5
Print the first dome
Print the first dome
The first dome, printed as step 4 describes.
6
6
Print the second dome
Print the second dome
The second dome, printed as step 4 describes.
7
7
Print the spacer ring
Print the spacer ring
The spacer ring, printed as step 4 describes.
8
8
Assemble
Assemble
Glue the two domes back to back on the spacer ring, convex sides out, holes half overlapping, and glue them on the foot of a 12 mm hardwood dowel staff.
Efni fyrir þetta skref:
Harðviðartappar1 stykki
Tveggja þátta epoxý1 stykkiNauðsynleg verkfæri:
Handsög
Sandpappír9
9
The churn
The churn
Use a straight-sided food-grade container about 160 mm across and 300 mm tall, so the dasher fits closely without rubbing, as he said. Drill its lid for the staff.
Efni fyrir þetta skref:
Geymslubox í matvælaflokki1 stykkiNauðsynleg verkfæri:
Hleðslubor
Gatasagarsett10
10
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the straight-sided churn cut away to show the two perforated domes back to back on the staff, and a lever.
11
11
Dash and make butter
Dash and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Work the staff up and down; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Efni fyrir þetta skref:
Rjómi2000 ml
Gróft sjávarsalt1 stykki
Vatn1 stykkiNauðsynleg verkfæri:
Hitamælir með nema sem situr í
Skeiðklukka
Stafræn eldhúsvog
Stór hrærskál úr ryðfríu stáli12
12
A dasher that sticks or splashes
A dasher that sticks or splashes
Double-concave disk dasher troubleshooting.
Flow
Loading...
13
13
History and honest limits
History and honest limits
**Joseph Marsh** of Petersburg, Menard County, Illinois, received US 7,527, dated 30 July 1850. He wrote that it creates "a suction of atmosphere through the milk ... that excels any improvement in churns of ancient or modern invention"; that is his claim. His churn was straight inside "instead of cone-shaped." He claimed the double-concave perforated discoid churn-dasher.
**Honest limits.** Printed domes stand in for his tin. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Efni
7- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 2000 mlStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
9- Staðgengill
- Staðgengill
- Staðgengill
- Hleðslubor3% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Hönnunarskrár
4Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
Reacting Churn Dasher: Two Rows of Oars Pitched Opposite Ways
eftir TheChef
MATUR OG DRYKKUR
37
0
0
0
0
0
Valved Hollow-Staff Plunger Churn: A Valve at the Top, Air Forced Out at the Foot
eftir TheChef
MATUR OG DRYKKUR
37
0
0
0
0
0
Valveless Cone Air Dasher: A Hollow Cone and Four Tubes, Nothing to Wear Out
eftir YourGrandma
MATUR OG DRYKKUR
34
0
0
0
0
0
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.