LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Orbiting Churn With Rod Rack: The Churn Circles Without Turning, Rods Break the Current
Maxwell moved the whole churn, but not round its own axis.
Rufus Maxwell of Lewis County, Virginia, received US 9,218, dated 24 August 1852, for a churn fastened in a frame hung by a hook and staple inside a supporting frame, with a crank connecting the two "so that the center of the bottom of the churn may revolve about a circle, (five or six inches in diameter)." This makes the milk flow round; a rack of parallel rods half an inch apart on a bow of "tough elastic wood" pressing against the sides breaks the current. He claimed forcing the milk through a rack "by revolving the churn in an orbit, without turning it on axis."
This rung works out the bottom's speed, then prints the rod holders and orbit crank, builds the frame and rack, and makes butter.
Miðlungs
About 4 hours, plus printing
Leiðbeiningar
1
1
The orbit
The orbit
Hleð Jupyter-vinnubók…
2
2
A churn that moves as a whole, with a grate inside, before it
A churn that moves as a whole, with a grate inside, before it
The embedded blueprint rocks a barrel through a grate. Maxwell circles his churn so the milk flows round through a rack of rods.
3
3
Read US 9,218
Read US 9,218
"This rack consists of a piece of tough elastic wood, bent as represented at Fig. 2, so that it will press against the sides of the churn, thus holding the rack in a stationary position, (with respect to the churn)."
4
4
Print the parts
Print the parts
Print four rod holders, the blocks n, and the orbit crank, whose pin is 70 mm off centre for a 5½ in circle. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Efni fyrir þetta skref:
PETG-þráður1 stykkiNauðsynleg verkfæri:
FDM-þrívíddarprentari5
5
Print the rod holder
Print the rod holder
The rod holder, printed as step 4 describes.
6
6
Print the orbit crank
Print the orbit crank
The orbit crank, printed as step 4 describes.
7
7
The rack
The rack
Bend a strip of thin steam-bent hardwood or spring steel into a U that springs against the inside of a tapered food-grade bucket. Screw the rod holders to its two legs and push 6 mm hardwood dowels through them, 12–13 mm apart as his, across the bucket.
Efni fyrir þetta skref:
Fjaðurstálræma1 stykki
Harðviðartappar1 stykki
Tréskrúfa #8 x 1"1 stykki
20 lítra fata1 stykkiNauðsynleg verkfæri:
Handsög
Hleðslubor
Skrúfjárnasett8
8
Frames and crank
Frames and crank
Fasten the bucket in a pine frame and hang that frame from a hook in a larger supporting frame. Mount the orbit crank on a post under the bucket so its pin sits in a socket at the centre of the bucket's bottom, and run the hanging frame's top up through a guide as the handle. Turning the crank carries the bottom round without turning the bucket.
Efni fyrir þetta skref:
Furuborð1 stykki
Kringlótt stöng úr deigu stáli1 stykkiTréskrúfa #8 x 1"1 stykkiHarðviðartappar1 stykkiNauðsynleg verkfæri:
HandsögHleðslubor
BorasettSkrúfjárnasett9
9
The patent drawing
The patent drawing
US 9,218 drawing sheet, public domain (expired patent).
10
10
Orbit and make butter
Orbit and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 3 litres. Turn the crank so the bottom circles steadily; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Efni fyrir þetta skref:
Rjómi3000 ml
Gróft sjávarsalt1 stykki
Vatn1 stykkiNauðsynleg verkfæri:
Hitamælir með nema sem situr í
Skeiðklukka
Stafræn eldhúsvog
Stór hrærskál úr ryðfríu stáli11
11
A rack that slips, a churn that turns
A rack that slips, a churn that turns
Orbiting churn troubleshooting.
Flow
Loading...
12
12
History and honest limits
History and honest limits
**Rufus Maxwell** of Lewis County, Virginia (the drawing reads Weston), received US 9,218, dated 24 August 1852. Four pins in the bow at n, n carry the rods, bored through them. He claimed forcing the milk through a rack by revolving the churn in an orbit without turning it on its axis, and the bow and rods connected together.
**Honest limits.** A bucket, pine frames and printed parts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Efni
10- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 2 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
- 3000 mlStaðgengill
- 1 stykkiStaðgengill
- 1 stykkiStaðgengill
Nauðsynleg verkfæri
9- Staðgengill
- Staðgengill
- Hleðslubor3% þóknunMagento Legacy Storeships internationallyStaðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Hönnunarskrár
2Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
Rocking Two-Section Barrel Churn: Cream Falls Through a Grate as the Barrel Tips End Over End
eftir Karen
MATUR OG DRYKKUR
35
0
0
0
0
0
Rotary Stirring Churn: Three Floats That Stop the Cream Merely Going Round
eftir YourGrandma
MATUR OG DRYKKUR
32
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
eftir TheChef
HANDVERK
54
0
0
0
0
0
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.