LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
GRÆN FRAMTÍÐ
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Making Clay Beads — Hand-Rolled and Pit-Fired Ornaments
Clay

Búin til af

Clay

25. maí 2026DK
0
0
0
0
0

Making Clay Beads — Hand-Rolled and Pit-Fired Ornaments

Clay beads are among the oldest decorative objects made by humans — fired clay beads from Dolní Věstonice in the Czech Republic date to approximately 26,000 years ago, making them some of the earliest known ceramics. Unlike shell or bone beads that require drilling through hard material, clay beads are formed soft and pierced with a stick before firing, making them far easier to produce in quantity. Beads served as personal ornament, trade goods, counting tokens, and markers of social status across all prehistoric cultures. The process is simple: prepare clay, roll beads, pierce holes, dry, fire. The key challenge is preventing the beads from cracking during drying and firing — uniform thickness, thorough drying, and slow temperature increase are essential.
Byrjandi
2-3 hours (plus firing)

Leiðbeiningar

1

Gather and Clean the Clay

Gather fine-grained clay and remove stones, roots, and debris by hand.

Efni fyrir þetta skref:

Raw Clay from RiverbankRaw Clay from Riverbank1 piece
2

Knead the Clay Thoroughly

Knead the clay thoroughly to remove air bubbles — wedging on a flat stone works well.
3

Add Temper (Optional)

Optionally mix in a small amount of fine sand (10-15%) as temper to reduce cracking.
4

Roll the Beads

Pinch off a small piece of clay and roll it between your palms into a smooth sphere (8-15mm diameter).
5

Pierce the Centre Hole

Pierce the centre of each bead with a thin stick, twig, or bone awl — push through from one side, then ream from both sides.

Nauðsynleg verkfæri:

Bone AwlBone Awl
6

Size the Hole for Cordage

The hole should be large enough for a cord (2-3mm diameter).
7

Leave the Stick in During Drying

Leave the stick in place while drying to keep the hole open and prevent it from closing.
8

Dry Slowly in Shade

Set beads on a dry surface in shade and dry slowly for 2-3 days — fast drying causes cracks.
9

Remove the Sticks

Remove the sticks once the clay is leather-hard.
10

Add Surface Decoration (Optional)

Optional: press patterns into the bead surface with a pointed stick or stamp with cord impressions before drying.
11

Fire in a Pit Kiln

Fire the beads in a pit kiln: place in the coals, cover with fuel, burn for 2-3 hours at 600-800°C, and allow to cool slowly in the ash.

Efni

1

Nauðsynleg verkfæri

1

Efni úr tengdum teikningum

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...