ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles
Woody

Creato da

Woody

6. ottobre 2026NO
16
0
0
0
0

Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles

The Hights made the wings of a horizontal box-churn dash into a screw. Cornelius R. Hight and John Hight of Geneva, Illinois, received US 7,490, dated 9 July 1850, for a "reacting spiral revolving dash" in a box churn: a shaft with four arms, those at one end at right angles to those at the other, and two wings fastened from arm to arm "so as to produce a quarter twist in the wings as they extend along the shaft." Its revolution produces "opposite currents, in the cream"; reversed, "the butter collects at the ends of the wings." This rung works out the wings' pitch, then prints the dash in one piece, fits it in a box, and makes butter.
Intermedio
About 3 hours, plus printing

Istruzioni

1

The quarter twist

Caricamento del notebook Jupyter…
2

Oblique wings on a horizontal arbor before it

The embedded blueprint sets straight wings at 30° to the axle. The Hights twist theirs a quarter turn from end to end, like a screw.
3

Read US 7,490

"The peculiar construction of the dash, consists in setting the arms to which the wings are attached, at right angles, upon opposite sides of the shaft, so as to produce a quarter twist in the wings as they extend along the shaft from one arm to the other."
4

Print the dash

Print the dash on end in one piece with supports (/uploads/blueprints/quarter-twist-spiral-dash-churn-dash.stl): shaft, four arms and two wings each twisted a quarter turn. Print the crank arm (/uploads/blueprints/quarter-twist-spiral-dash-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Materiali per questo passaggio:

Filamento PETGFilamento PETG1 pezzo

Strumenti necessari:

Stampante 3D a filamento (FDM)Stampante 3D a filamento (FDM)
5

Fit the box

Take a food-safe box about 220 × 150 × 160 mm, its proportions close to his 18 × 12 × 13 inches. Drill both ends on the axis 80 mm up. Push a 10 mm square hardwood shaft through one end, the dash and the other end, with a leather washer at each.

Materiali per questo passaggio:

Contenitore di conservazione per uso alimentareContenitore di conservazione per uso alimentare1 pezzo
Tasselli di legno duroTasselli di legno duro1 pezzo
Striscia di pelleStriscia di pelle1 pezzo

Strumenti necessari:

Trapano a batteriaTrapano a batteria
Serie di punte da trapanoSerie di punte da trapano
Sega a manoSega a mano
6

Crank and lid

Glue the crank arm and a dowel handle on the shaft's outer end, and fit the box's lid, as his rabbeted cover.

Materiali per questo passaggio:

Tasselli di legno duroTasselli di legno duro1 pezzo
Colla da legnoColla da legno1 pezzo

Strumenti necessari:

Carta abrasivaCarta abrasiva
7

The patent drawing

US 7,490 drawing sheet, public domain (expired patent).
Passo 7 - Image 1
8

Churn, then reverse to collect

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank steadily; time until the butter comes. Then reverse the crank so the butter collects at the ends of the wings, as they said. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Materiali per questo passaggio:

Panna da montarePanna da montare1500 ml
Sale marino grossoSale marino grosso1 pezzo
AcquaAcqua1 pezzo

Strumenti necessari:

Termometro a sonda permanenteTermometro a sonda permanente
CronometroCronometro
Bilancia digitale da cucinaBilancia digitale da cucina
Grande ciotola da impasto in acciaio inossidabileGrande ciotola da impasto in acciaio inossidabile
9

Wings that scrape, butter that won't collect

Quarter-twist spiral dash troubleshooting.

Flow

Loading...
10

History and honest limits

**Cornelius R. Hight and John Hight** of Geneva, Kane County, Illinois, received US 7,490, dated 9 July 1850. Their wings could be wood or tin, split into the arms with a saw and fastened with brads or small screws; the wing's inner border was cut to arcs of 16- and 23-inch circles; the dash ran on a coupling gudgeon in a cast box and a screw pivot. They wrote it made butter "in from 5 to 8 minutes"; that is their claim, not our measurement. They claimed the application of a reacting spiral revolving dash to a box churn or any of the usual forms of churns. **Honest limits.** A food-safe box and a printed dash stand in for theirs, and our wings twist evenly rather than following their curved borders. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

Materiali

8

Strumenti richiesti

9

Questo progetto realizza

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...