ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box
A beater spun in a round bowl soon drags the whole mixture round with it.
Thomas McBean of Fowlerville, New York, received US 24,134, dated 24 May 1859, for an egg beater: "a double spiral-shaped beater or dasher with its surface formed into steps within a square box," turned horizontally on a vertical shaft by a bevel pinion and a handle, so that the dasher and the square box together "so thoroughly breaks up all portions of the eggs that they may be well and very thoroughly beaten in a few seconds."
This rung compares the side and corner gaps, then prints the stepped dasher, builds a square box with a bevel drive, and times beating in the box against a round bowl.
Intermedio
About 4 hours, plus printing
Istruzioni
1
1
Tip speed and the corners
Tip speed and the corners
Caricamento del notebook Jupyter…
2
2
A geared beater a month before it
A geared beater a month before it
The embedded blueprint beats with two wire whisks turning opposite ways. McBean turns one stepped dasher and lets the box's corners do the breaking up.
3
3
Read US 24,134
Read US 24,134
"The nature of my invention consists in arranging a double spiral-shaped beater or dasher with its surface formed into steps within a square box and in communicating to this dasher a swift rotary motion so as to revolve it horizontally within said box."
4
4
Print the dasher
Print the dasher
Print the stepped double-spiral dasher (/uploads/blueprints/stepped-spiral-egg-beater-dasher.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Materiali per questo passaggio:
Filamento PETG1 pezzoStrumenti necessari:
Stampante 3D a filamento (FDM)5
5
Build the box
Build the box
Cut a plywood base and four sides to make a box 104 mm square inside and 90 mm deep. Glue and screw it, and seal the inside seams with silicone.
Materiali per questo passaggio:
Pannello di compensato1 pezzo
Vite da legno #8 x 1"1 pezzo
Sigillante siliconico1 pezzoStrumenti necessari:
Sega da traforo
Trapano a batteria
Serie di punte da trapano
Set di cacciaviti
Righello6
6
Fit the shaft and gears
Fit the shaft and gears
Screw a hardwood bar across the box's top with a bracket above it. Run a 5 mm rod down through the bar to a socket in the floor, with the dasher at its foot and one bevel gear at its top; mount the other gear on a crank shaft through the bracket so they mesh.
Materiali per questo passaggio:
Blocco di legno duro1 pezzo
Tondo di acciaio dolce1 pezzo
Coppia di ingranaggi conici (acciaio, 1:1)1 pezzo
Resina epossidica bicomponente1 pezzo
Rondella piana1 pezzoStrumenti necessari:
Seghetto per metalliTrapano a batteriaSerie di punte da trapano
Morsa da banco7
7
The patent drawing
The patent drawing
US 24,134 drawing sheet, public domain (expired patent).
8
8
Square box against round bowl
Square box against round bowl
Beat two egg whites in the box at about two crank turns a second and time them to stiff peaks. Repeat with the dasher in a round bowl of the same size.
Materiali per questo passaggio:
Uovo4 pezziStrumenti necessari:
Grande ciotola da impasto in acciaio inossidabile
Cronometro9
9
A dasher that swirls, scrapes or slips
A dasher that swirls, scrapes or slips
Stepped spiral egg beater troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Thomas McBean** of Fowlerville, Livingston County, New York, received US 24,134, dated 24 May 1859. The dasher's spiral circular plates are soldered to a small tube and bent into steps radial from the axis; the shaft passes up through the box's cover to a bracket, its lower end resting on a pin in the box's bottom. He claimed the double spiral dasher in combination with the square box.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A printed dasher and a bought 1:1 bevel pair stand in for his tin plates and pinions. Your times are the result.
Materiali
10- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
- 1 pezzoSegnaposto
- Segnaposto
- Segnaposto
- 1 pezzoSegnaposto
- 4 pezziSegnaposto
Strumenti richiesti
10- Segnaposto
- Segnaposto
- 1 vendor sell this, none ship to you yetSegnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.