コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Top and Bottom Swages: Steel-Faced Iron Like a Fuller, Square Tang Below, Withy Handle Above, or Sprung Together (Edwinson, 1886)
Forge

作成者

Forge

14. 11月 2026NO
6
0
0
0
0

Top and Bottom Swages: Steel-Faced Iron Like a Fuller, Square Tang Below, Withy Handle Above, or Sprung Together (Edwinson, 1886)

Swages, the smith's top and bottom tools for bringing a weld back to round or square, from George Edwinson's smithing series in Amateur Work (1886): steel or steel-faced iron made like a fuller, the bottom tool tanged for the anvil's square hole, the top tool on a withy or iron-rod handle, or the pair coupled by a steel spring for single-handed work.
上級者
A day at the forge per pair

手順

1

Read Edwinson

"They may be made of steel throughout, or of steel-faced iron. The method of making them is similar to that for making fullers and setts."
2

Weld the blanks

As for a fuller: upset an iron bar, split it into a fork with a hot set, weld in a forged steel wedge. Or use steel throughout.

このステップの材料:

錬鉄の棒錬鉄の棒1 個
るつぼ鋼るつぼ鋼1 個
ホウ砂の粉末ホウ砂の粉末1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
大ハンマー大ハンマー
熱間たがね熱間たがね
鍛冶やっとこ鍛冶やっとこ
3

Bottom swage

Forge the steel face into a block with a square tang that fits the square hole in the tail of the anvil, like a bottom set (his figs. 285-288).

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
鍛冶やっとこ鍛冶やっとこ
4

Top swage

Forge the matching top tool with a neck for its handle.

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
鍛冶やっとこ鍛冶やっとこ
5

Cut the grooves

Form the working groove in each face to the section you need: round, half-round, oval, diagonal, square or rectangular. Groove sizes are ours: match the bars you forge.

必要な工具:

鍛冶炉鍛冶炉
フラー(溝切り鉄)フラー(溝切り鉄)
金床金床
やすり(手やすり)やすり(手やすり)
6

Handle or spring

Give the top tool a hazel-rod or iron-rod handle as for fullers and top sets. For single-handed work, couple the top and bottom tools with a steel spring (fig. 283).

このステップの材料:

ハシバミの若枝(青く、しなやか)ハシバミの若枝(青く、しなやか)1 個
軟鋼丸棒軟鋼丸棒1 個
鉄の針金鉄の針金1 個
ばね鋼帯ばね鋼帯1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
7

Grind and harden

Grind the faces level so they fit each other, then heat the whole tool and harden it (his note for hand-worked dies).

必要な工具:

回転砥石回転砥石
鍛冶炉鍛冶炉
焼き入れ桶焼き入れ桶
8

Use them

Work the weld at a red heat. Hold the bar and the top swage; the striker hits the top tool with a light sledge. Pass the bar to and fro, turning it for round. After each heat gauge the weld in the swage block or with callipers.

必要な工具:

鍛冶炉鍛冶炉
大ハンマー大ハンマー
ノギスノギス
9

Troubleshooting

Swage troubleshooting.

Flow

Loading...
10

History and honest limits

From George Edwinson, "Smithing and Forging" XI, **Amateur Work, Illustrated**, vol. VI (1886-87), pp. 259-260 and figs. 283-290 (checked on the archive.org scan amateurworkillus06lond). The forging steps follow his fuller method (pp. 14-16). Groove sizes, the spring stock and the tools are ours.

材料

7

必要な工具

11

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...