コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Horizontal Cylinder Still: the Riveted Fire Still (Bell, 1923)
The refinery's direct-fired crude still: a long horizontal cylinder of riveted steel plate hung on lugs over a brick furnace, with a steam line, manholes, a vapour outlet to the condensers and a bottom outlet for residue.
Variable: size; the favoured length is about three times the diameter. Bell's Fig. 15 is a 600-barrel still, 12 ft across and 36 ft long, of 1/2 in plate throughout.
Source: H. S. Bell, American Petroleum Refining (1923), pp. 83-92. Picture: Fig. 15 of the book.
エキスパート
Unknown
手順
1
1
Size the still
Size the still
Make it about three times as long as it is wide. Batch stills take overhead about 1.5 gallons per hour per square foot of evaporating surface (two-thirds of diameter x length); continuous ones about 2.5. Give the vapour outlet at least 0.17 sq in per gallon of distillate per hour, placed half to two-thirds of the way from the fire end.
必要な工具:
不明な寸法2
2
Choose and roll the plates
Choose and roll the plates
Use fire-box or still-bottom steel 1/2 in thick for the bottom (5/8 in for stills run down to coke; more is not worth it). Up to 10 ft diameter, 3/8 in flange steel does for the sides and top; larger stills, 1/2 in throughout. Up to 30 ft long: bottom of two plates, sides of three, top of narrow barrel plates; longer: three, four and barrel plates 5 to 6 ft wide. Keep the caulking edges of the bottom plates away from the fire. Dish the heads to a radius equal to the diameter, in one piece up to 10 ft, otherwise seamed on the horizontal diameter, as thick as the shell or 1/16 in thicker.
このステップの材料:
軟鋼板1 shell, heads必要な工具:
板曲げロール
パンチプレス3
3
Rivet and caulk
Rivet and caulk
Double-rivet all seams except at flanges and openings, with 3/4 in rivets even in the bottom, so holes can later be reamed to 7/8 or 1 in for repairs. Bevel and caulk the plates inside and out.
このステップの材料:
鋼製リベット1 3/4 in必要な工具:
リベットハンマー4
4
Fit openings and steam line
Fit openings and steam line
Fit (Fig. 15) a 24 in manhole in the front head, 18 in manholes on top, a 12 in vapour outlet, a 2 in steam line, a tar plug and a 4 in bottom outlet; caulk steel details to the shell and give cast-iron ones a caulking pad. Rivet lugs on the sides.
このステップの材料:
鋳鉄品1 manhole frames, outlet castings
鋼管(厚肉・両端ねじ切り)1 2 in steam line
蒸気弁1 個
仕切弁1 4 in outlet
軟鋼の山形鋼1 lugs必要な工具:
リベットハンマー5
5
Set it over the furnace
Set it over the furnace
Hang the still on lugs from columns on concrete piers, lugs no more than 7 ft apart, so it is independent of the brickwork (Fig. 21). Set it at least 7 to 8 ft above the grates or burners, or better, put the fire box in a Dutch oven in front, for clean combustion. Batch stills expose about a third of the circumference to the fire; for continuous running raise the lugs 12 in above the centre line with a stiff tie between them and fire the full half circumference.
このステップの材料:
コンクリート1 piers
耐火粘土れんが1 furnace lining
れんが1 setting必要な工具:
左官ごて材料
10- 1 shell, headsプレースホルダー
- 1 3/4 inプレースホルダー
- 1 manhole frames, outlet castingsプレースホルダー
- 1 2 in steam lineプレースホルダー
- 1 個プレースホルダー
- 1 4 in outletプレースホルダー
- 1 lugsプレースホルダー
- 1 piersプレースホルダー
- 1 furnace liningプレースホルダー
- 1 settingプレースホルダー
接続ブループリントの材料
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。


