アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Self-Closing Float Dasher Churn: Floats That Open to Churn and Close to Gather
Davis wanted one dasher that would churn "in the most effectual manner," then gather the butter and work out the buttermilk.
Robert W. Davis of Rodgersville, New York, received US 7,233, dated 2 April 1850, for self-adjusting rotary churn-dashers. The dasher's fixed slats are set "at such angles as to force the cream toward the center"; movable floats hinged to its sides stand open when turning that way and move it outward, "which various and contrary motions so agitate it, that the butter is soon formed." Turned backward, the floats close on the slats so the outside forms "a uniform curve concentric to the axis," which throws the butter to the sides and bottom and presses it free of milk.
This rung looks at the floats' swing, then prints the sides, slats and floats, assembles the dasher in a box, and makes butter.
中級者
About 4 hours, plus printing
手順
1
1
The floats' swing
The floats' swing
Jupyter ノートブックを読み込み中…
2
2
A dasher that churns one way and gathers the other before it
A dasher that churns one way and gathers the other before it
The embedded blueprint reverses fixed paired blades to roll the butter up. Davis lets hinged floats change shape by themselves when the crank is reversed.
3
3
Read US 7,233
Read US 7,233
"In order to gather the butter and work it, the dasher is then turned in the contrary direction, and the movable slats then closing the outside of the slats of the dasher form a uniform curve concentric to the axis and moving with the convex side foremost. By a few revolutions of the dasher the butter is thrown from the center to the sides and bottom of the churn box, and these gathered into a roll."
4
4
Print the parts
Print the parts
Print two side pieces, four fixed slats, four curved floats with hinge eyes and the crank arm. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
このステップの材料:
PETGフィラメント1 個必要な工具:
FDM 3D プリンター7
7
Print the float
8
8
Print the crank arm
9
9
Assemble the dasher
Assemble the dasher
Slide the two side pieces onto a 10 mm square hardwood shaft 148 mm apart and screw the four slats between them. Hang each float between the arms' knuckles on a 3 mm stainless rod as its hinge, so it swings open one way and lies against its slat the other.
このステップの材料:
堅木のダボ1 個
軟鋼丸棒1 個
小ねじ1 個
木工用接着剤1 個必要な工具:
金切りのこ（ハクソー）
ドライバーセット
手のこぎり10
10
The box
The box
Take a food-safe box about 230 × 190 × 200 mm. Drill both ends on the axis 100 mm up, pass the shaft through with a leather washer at each end, and glue the crank arm and a dowel handle on.
このステップの材料:
食品級の保存容器1 個
革の細帯1 個木工用接着剤1 個必要な工具:
コードレスドリル
ドリルビットセット11
11
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the box with one side off to show the dasher's side pieces, the fixed slats and the hinged curved floats, and the crank.
12
12
Churn forward, gather backward
Churn forward, gather backward
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank forward, floats open; time until the butter comes. Then crank backward so the floats close and the round dasher gathers the butter into a roll; draw off the buttermilk and keep cranking to work it, as he did. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
このステップの材料:
生クリーム1500 ml
粗い海塩1 個
水1 個必要な工具:
差しっぱなしのプローブ温度計
ストップウォッチ
デジタルキッチンスケール
ステンレス鋼の大きな混ぜ鉢13
13
Floats that won't open or close
Floats that won't open or close
Self-closing float dasher troubleshooting.
Flow
Loading...
14
14
History and honest limits
History and honest limits
**Robert W. Davis** of Rodgersville, Steuben County, New York, received US 7,233, dated 2 April 1850. His drawing shows the dasher in a churn box with slats D strengthening it. He claimed "the self adjusting float or slat (C) which opens when churning the cream and closes of itself when the dasher is turned in the opposite direction to gather the butter."
**Honest limits.** A food-safe box and printed parts stand in for his wooden box and dasher. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
材料
10- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 2 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1500 mlプレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
必要な工具
10- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- 1 vendor sell this, none ship to you yetプレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
設計ファイル
5この設計図で作るもの
関連ブループリント
これらのブループリントは知識を共有しています — 技術、材料、原理
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。